Jump to content
SAU Community

Recommended Posts

they are called Model 6 (by AVS obviously), seen those exact sizes (not sure what offsets though) sell anywhere from 1200-1600 2nd hand depending on condition

ok cool thanks, im thinking of getting them rubbed back and resprayed they should look brand new!

Im looking to sell mine, not now but after buying new mags and looking to see how much mine are worth also.

Volk 3 piece 17 x 8.5 front & 17 x 9.5 rear, tyres are 90% rear & 95% front

Curb damage on front rims and some paint coming off mostly on caps

And again not selling currently

post-23924-1175672294.jpg

post-23924-1175672340.jpg

post-23924-1175672370.jpg

Edited by gts33t
they are called Model 6 (by AVS obviously), seen those exact sizes (not sure what offsets though) sell anywhere from 1200-1600 2nd hand depending on condition

Are you dreaming or do actually look in the for sale section.....the only 17's that fetch over 1k are deep dish, or expensive volks etc

Are you dreaming or do actually look in the for sale section.....the only 17's that fetch over 1k are deep dish, or expensive volks etc

Jap lightweight wheels, dished or not, such as the Model 6 will always fetch over 1K if in good condition, they are 17" x8 & 9 yet they still weight less than standard r33/s14 or s15 rims, granted if they were heavy or very poor condition you wouldn't get much

again have you looked in the for sale sections.....1200 max with new tyres, unless there volk te37s something deep dish etc you wont get more than 1200 if you pay more your getting ripped hardcore, theres a set of 17" Work VS Rims for sale here in sa for 1000 ono.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...