Jump to content
SAU Community

Capable 400+ Rwhp Sleeper

titdogg
 Share

Recommended Posts

titdogg Explorer

titdogg

Posted
Posted (edited)

hey guys i no its not a nissan.. but heres my bmw 520i with a 1jzgte motor in it... it makes around 300 kws at the wheels on 14 psi.. mods r 1j, r154 gearbox, button clutch,custom high mount manifold, hiflowed t04, 45 mm external gate, 3 inch exhaust, custom plenum, 550cc injectors, 100mm throttle body front mount, microtech computer lts 12 and dash, custom 1 piece tail shaft, 2006 m5 diff and axels, car 100 % legal, car now has bigger turbo when tuned will be good for over 400 at the wheels

im looking for 19 or swap for a ss ute or vx vy ss... cars on the gold coast

contact me on 0411790295 or get me on here cheerz

post-37159-1175900345.jpg

post-37159-1175900610.jpg

post-37159-1175900632.jpg

post-37159-1175900756.jpg

Edited by titdogg
Link to comment
https://www.sau.com.au/forums/topic/163538-capable-400-rwhp-sleeper/
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jumbotron
      R34 GTR 4.11 gears: use R33 GTR speedo sensor?

      By Jumbotron · Posted

      Hi Everyone, I did 4.11 gears in my 34 GTR and only thing that remains is to fix the speedo reading (it reads about 15% higher) using the R33 GTR speedo sensor. Few questions:   1. Does the R33 speedo sensor fit right in to the 6sp getrag? I read it does but wanted to confirm because the speedo sensors between 33 and 34 look quite different   2. The connector on the 33 speedo sensor will not plug into the connector on the getrag. Do I just need to wire the pins together manually?  See pic: https://imgur.com/a/NTDzFe8
    • joshuaho96
      R34 rb25det neo lower timing belt cover bolt part numbet

      By joshuaho96 · Posted

      Looks like 08120-62033 to me?
    • drifter17a
      R34 rb25det neo lower timing belt cover bolt part numbet

      By drifter17a · Posted

      Does anyone know how I could find the part number for bolts used with  r34 with rb25detneo engine lower timing belt cover?   my timing cover was rubbed and i fixed it but upon putting the harmonic balancer i see the timing cover is almost rubbing and that is due to previous owners using general bolts and washer rather than the bolts per link below which sits inside the washer and pull the cover in   not sure if those bolts will fit rb25   https://www.ebay.co.uk/itm/326510870741?gad_source=1&gbraid=0AAAAAB_7XZxjuciMybdVOTShCs9857686&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338723872&toolid=20006&customid=7jIl12glAAAAVfHSSnyxAmSsdRxnAAAAAA
    • joshuaho96
      Nismo rear spats

      By joshuaho96 · Posted

      If the slightly higher internal EGR caused by a high flow cat causes detonation your tuner was way, way, way too aggressive to begin with. Timing scatter is a problem unless you go to a crank trigger, winter vs summer blend has different octane, list goes on.
    • joshuaho96
      New fix for low tyre pressure from bmw

      By joshuaho96 · Posted

      The H1 Alpha with the 6.6 Duramax is basically the actual powerplant it needs to be remotely ok to drive on public roads. It's just not worth the cost to buy a real one. Humvees look cool but man the reality of them is depressing. Grunts aren't kind to them but they aren't that reliable either, they have horrible payload despite absolutely massive size, zero actual armor against mines/small arms, absolutely anemic naturally aspirated diesels, list goes on. 
×
×
  • Create New...