Jump to content
SAU Community

Recommended Posts

Ok guys,

I am after either a RB25DET COMPLETE HEAD (Cams, valves, etc) and intake manifold. (not plenum, the intake under the plenum) i will pay around the $500+ISH mark for the right stuff!

OR

RB26 complete head also including intake manifold (ex plenum) for around the $1000 ish mark.

also after these bits and peices:

- RB25DET Harmonic Balancer

- Passanger side sun visor for a R33 1994 series 1

Note: i will pay more if the head has had work done to it etc. so dont be affraid to make a offer!

Link to comment
https://www.sau.com.au/forums/topic/16404-rb25-rb26-engine-stuff/
Share on other sites

Steve: Looking for a head with the intake manifold/(without plenum), just the intake manifold and complete head. I will see what i can find if nothing comes through by the end of this week i will send you a PM. :P

Cheers,

Trev.

Ive got a Rb25 Head $600 and Rb26 Head $1500not

The Rb25 Head has been ported, polished and reseated and is missing 3 coils, exhaust manifold and turbo and also top half of intake plenum and throttle body

The RB26 head is a bare head no coils, no CAS, no manifold nothing these are 3,000 complete let me know if you are keen Ive bought one too many of these and the RB25 was off my RB25/30 combo

GR8NES [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
    • Sounds like the oil pressure light is wired into the oil temp sensor... As it warms up, resistance on temp sensor reduces, hence more current can flow and the dash light gets brighter.
    • Got the front subframe and suspension in.    
    • If it's cold in summer, then no issue. If it's cutting out every few seconds and you're not reaching your target temp, then there's an issue. One could be the pressure switch and the other issue could be the temp probe inside the evaporator.
×
×
  • Create New...