Jump to content
SAU Community

Recommended Posts

Guest INASNT
Originally posted by RON-15H

just wondering i have just ordered a trust dual piller guage holder and i intend to use autometer guages are saying that they wont fit?

cause the jap size is 60mm

and the autometer size is 2.25" which is the same???

they dont mate up 100%, u will have to trim the gauge holder a bit.

Originally posted by INASNT

yes, ask meggala, 1 of those boost gauges was the cause of his blown engine

I believe you and your opinion on these forums means a lot i think and you know your stuff but are you basing your writing off an entire range on just one instance or is there more proof that they are crap.

I just want to know as i though that splitfire and autometer were in the same league and i havn't heard anything wrong with autometer.

i got my one form rampage in newcastle cost me $180 the spiltfire gauges u just haw to cut the top out very finely just a little bit at a time ever slowly till u get a it to fit to mch and it looks shit house u c the back ov the gauge

so yes u can fit the big spiltfire gauges in to the piler mounts and looks good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...