Jump to content
SAU Community

Recommended Posts

From the PowerFC FAQ (in my sig)

Can I drive around without it being tuned for a few days? Months? ?

You can drive the car around as you would normally but you should take care not to put stress on the engine. Basically don't fang around in it, as you could be running unsafe A/Fs etc and just causing more damaged. Best to get it tuned. Make sure you watch the knock levels if you do this to make sure there isn't excess detonation.

What about with nismo 555cc injectors and z32 afm? will the car still be able to drive around on the base map? im thinking of driving my car to my tuner (1 1/2 hours) will it still drive fine and be safe? or should i put it on a trailer instead.

Also have another questions (sorry to hijack your thread Kaige) should i install the 555's and z32 after i have done the self idle learn procedure with the stock injectors and afm, or should i install the 555's and z32 and then do the self learn idle?

Cheers

my recommendation would be to reset PFC

turn key to ON but not START

then dial in correct inejector setting and afm

then once done turn to START and do self idle adjust

So do the self idle learn with the nismo 555's and z32 afm?

yeah i would do that if it was me

just make sure you selecgt the right AFM, make sure its a genuine z32 and make sure you dial in the right latency and correction for the injectors

yeah i would do that if it was me

just make sure you selecgt the right AFM, make sure its a genuine z32 and make sure you dial in the right latency and correction for the injectors

Awsome, ill give it a shot when my injectors and afm arrive, by the way do you happen to have the correct latency and corrections values for when i upgrade the stock injectors to nismo 555cc's, i worked it out a while ago but have lost the peice of paper i worked it out on :P

Thanks for the help.

Ok, so ive worked out 66% for correction (please correct me if this is wrong), but i cant seem to work out the latency, im guessing i need to find out the latency off the nismo 555cc's and then subtract 0.528 msec for the stock injectors to work out the latency right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...