Jump to content
SAU Community

Recommended Posts

just get an organic clutch man, llike 340 from sliding, i fink.lol
nah i cant. they dont want to deal with me anymore.

gonna save up n get a good one. hopefully in the next 2 months il have one put in. then im gonna orgainse the next sorrento cruise :ermm:

Hey guys!

I was bored tonight and just checking what was going on in the cruise section. This looks pretty awesome.

I think I'll meet you guys there! Weather forecast looks good, partly cloudy but no rain.

I got some new tyres last week as well! wooooo!!

See the first picture in my previous post? Yea, that's how many cars went :rolleyes: lol only 3 in total. :whistling:

On the way there the weather held up pretty well most of the time, but some of the twisties were a bit wet under the canopies.

Going home we took the scenic route, which was very nice. Not many cars on the road, and those that were on the road were nice enough to pull over and let us go past. We couldn't believe our luck!!

As we got closer to Melbourne the rain came, but by then we'd pretty much finished.

I haven't got much more photos, here are a couple of other good ones.

post-36410-1180874885_thumb.jpg

post-36410-1180874892_thumb.jpg

hi peoples

were did everyone go?

well.........

for those that didnt show you missed out on a great day

weather held out when it counted thru most of the good twistys road conditions were pretty good

accept for rain foresty bit were it was still a bit damp but no doubt a good day had for those that showed up[ 3 all up ]

but have to admit being in a small group made things a little more intresting

more photos to come

from random scenery??? come on keith i know you have plenty....

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...