Jump to content
SAU Community

Sold

GTRBOYZ
 Share

Recommended Posts

BlackR32 Rising Star

BlackR32

Posted
Posted

PM sent, hopefully sold.

Hi Guys,

I have a brand new, still in box, Tomei Sump Baffle kit for sale. This kit fit's into your stock sump with no modifications to the factory oil pan (no need to cut and shut like the extension kits). Quite easy to fit once the sump is off. Getting the sump off is the hard part.. These things are an absolute must for any quick GTR especially if you plan on doing any track days. GTR RB26 engines are known to have oil surge and oil control problems and the Tomei sump baffle kit is designed to combat this. The kit comes with the baffles which have little 1 way trap doors to stop oil flowing away from the pick-up whilst still allowing maximum oil flowing towards the pick-up. This design will help stop oil starvation which is fatal to your big $$ motor. I had bought these for my GTR but plans change so they are up for grabs. It's definitely one part that is worth adding if you are building an RB26, or adds it to your currently healthy motor to ensure it stays that way. Retails for $450 at Unique Auto sports.

I also got a Tomei Oil restrictor for the block. To stop the flooding of the head. This is also a must for High revving RB26 Motor. Retail at $60. For anyone who already had taken their engine apart. It a lot of work just to install this alone.

Will sell both for $365

*located in Liverpool Sydney* Can post but you have to pay for courier.

Link to comment
https://www.sau.com.au/forums/topic/169542-sold/#findComment-3133278
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...