Jump to content
SAU Community

Winding Noise From The Engine

komokefe

By komokefe,
in General Maintenance

 Share

Recommended Posts

RANDY Veteran

RANDY

Posted
Posted

If you're talking about alternator whine through your car speakers, there's plenty about it and no definitive solution. =-[

If it's an engine-bay thing or external sound, it could perhaps be your fuel pump or a noisy accessory like an alternator or powersteering pump?

hmm... getting deeper with warmth could even be your idler bearings that your timing belt runs over. If they're worn and haven't been replaced at a 100,000km service, they can get noisy.

komokefe Apprentice

komokefe

Posted
  • Author
Posted
If you're talking about alternator whine through your car speakers, there's plenty about it and no definitive solution. =-[

If it's an engine-bay thing or external sound, it could perhaps be your fuel pump or a noisy accessory like an alternator or powersteering pump?

hmm... getting deeper with warmth could even be your idler bearings that your timing belt runs over. If they're worn and haven't been replaced at a 100,000km service, they can get noisy.

hey cheers for your help man, but i dont think its nothing to do with the speaker sound, its more off the engine-bay, when i had my WOF done recently, the guy noticed a leak from the power stearing underneath? so not to sure if tha would make since to you?

buggor34 Proficient

buggor34

Posted
Posted
hey cheers for your help man, but i dont think its nothing to do with the speaker sound, its more off the engine-bay, when i had my WOF done recently, the guy noticed a leak from the power stearing underneath? so not to sure if tha would make since to you?

check you power steering fluid, sounds like you may be running low

Godzilla32 Veteran

Godzilla32

Posted
Posted

You should really be getting it looked at by a mechanic to work out what the problem actually is...Know one can know for sure without taking a detailed look. Everything makes different noises for different reasons. Take it to a workshop

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...