Jump to content
SAU Community

Recommended Posts

I've been reading as much as i can on the forums about suspension, SK's kit and Tein HA's.

I've noticed a lot of complaints about the Tein HA's - in particular the harshness of ride. I don't really understand how harsh the ride is as i'm running stock suspension now, but would it be like go-kart stiff? or would it be able to be compared to anything else?

Also, would it be any good for putting down 200rwkw? I've read a couple of stories with ppl having trouble putting power down with these coilovers although some seem to love them.

I've read about SK's setup too, and it seems like a pretty good setup (user reviews) although i may be able to get the HA's for half the price.

My question would be, should i spend the extra money and get SK's R32 gts-t setup? or go for the HA's?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/
Share on other sites

hey mate i've got Tein HR's and HA's.....in both my skylines well the HA has a 16 stage soft to stiff levels soo liek if u think its hell stiff turn the knob and make it soft but my tein HR their only height adjustables so they are real stiff so every little pebbles feel liek a pot hole but the HA's are ok well i danno about putting power down but i know that my Teins are awsome in the Handling wise i mean taking corners there is like prolly 0 body roll but on aussie roads it can be a bit like harsh the ride but normal roads that don't have pot holes etc will be good :stupid: hehe it is a little bumpy but waht coil overs arnt?

Cheers

Chi

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3143798
Share on other sites

I had HA's, and yes they were Go-Kart harsh!

One had the little knob thing broken off, so i couldnt adjust the damping ratio.

They were also super low, ive got a feeling they were for a GTR (is that right?!?), because when i tried to wind down the spring to raise the car, the car didnt go any higher. It was super low = no travel = very very bumpy. I had the steering wheel to hold onto, but my passengers didnt enjoy it. Hills drives were dangerous, car would bounce around corners....

But maybe my HA's were setup wrong.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3143889
Share on other sites

hey mate i've got Tein HR's and HA's.....in both my skylines well the HA has a 16 stage soft to stiff levels soo liek if u think its hell stiff turn the knob and make it soft but my tein HR their only height adjustables so they are real stiff so every little pebbles feel liek a pot hole but the HA's are ok well i danno about putting power down but i know that my Teins are awsome in the Handling wise i mean taking corners there is like prolly 0 body roll but on aussie roads it can be a bit like harsh the ride but normal roads that don't have pot holes etc will be good :stupid: hehe it is a little bumpy but waht coil overs arnt?

Cheers

Chi

The harshness is mainly because of the high spring rates found in the HA. If you don't want a harsh ride, I recommend the Tein Superstreets if you are after coilovers. They are more street friendly as spring rates are closer to factory. I've proven to a lot of ppl with the mentality "all coilovers are harsh" that the Tein SS are surprisingly comfortable!

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3143950
Share on other sites

coilovers traditionally have very stiff rides - great for responsiveness but not so good for australian roads. have seen a WRX with coilovers hit corrugations on a tarred road (the surface was just uneven.. kinda shit) and since it was around a corner the car just skipped straight over them like a rock on a pond and ploughed into a ditch.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3145163
Share on other sites

ive got em too and in my opinion if you can get em new for half price then get em. mine were used and knocks a bit b/c the pillow balls are worn. also my front 2 damper knobs are missing so i cant adjust them but they seem fine. yep they are damn stiff, i got sore neck the first week after 10mins driving. once you get used to them theyre great but big bumps and holes are unforgiving. makes you read the road conditions alot more. i love em but i havent been in a car with SK's setup to compare which is something thats holding me back from getting them.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3145222
Share on other sites

also my front 2 damper knobs are missing so i cant adjust them

I wonder if this is a common problem, with the adjustment knobs breaking off - one of mine was broken too. Might be something to be careful with - if you own HA's, be careful not to turn the knob with too much force.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3146882
Share on other sites

I've got HA's on my 33 GTR and yes they are too hard because of the spring rates, but cornering and precision in handling are awesome. Once the tyres are up to temp I can easily get more G's in cornering than I can in acceleration, and thats a huge buzz. I love it!

Still, i'm changing to bilstein shocks and softer springs soon as the car is my daily driver as well and the roads in cairns are way too bumpy.

I've got easily 110mm of ride height and there is room to adjust higher if I want too.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3148646
Share on other sites

I've got the HAs and don't find them too hard for normal street use. Mine have the progressive spring feature tho (i.e. small spring for riding everyday bumps, big fu(k off spring for cornering etc).

I have the rears set 4 clicks from squishy, and the fronts 4 clicks from house stumps. They make cornering a dream :P

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3149776
Share on other sites

The helper springs cant do anything for softening a ride, they bind (crush and become solid) with the weight of the car on them so the spring rate is only given by the main spring. They are only there to keep the main spring trapped at full droop.

The Tein HAs and HRs are pretty old now aren't they? I'd be wary of buying 2nd hand ones. Either way, I would just get the Whiteline/Bilstein groupbuy, for the amount of handling AND comfort you get, it's pretty hard to beat.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3161424
Share on other sites

I put a set of HA's in my mates mitsubishi vr4 and he loves them, reckons they were the best 700 bucks he ever spent.

But as stated sometime coi over can be a little harsh on the road, i had g4's in my r31 and loved them but reall stiff springs so occasionally i'd second guess driving it. Now i got JIC's in me cefiro and there not to bad just get to know your route to work and home a little better

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3162871
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...