Jump to content
SAU Community

Recommended Posts

I did a search and couldn't really find what I am after.

When I start my car, there is a little puff of white smoke, and that's it. None when i'm driving or boosting, just on start up.

What would be causings this?

Also after that my exhaust has quiet a strong smell, it's had to tell what the smell is of - similar to burnt fuel, but this is constant.

I also had the car dynoed (not a tune or check, was just an open day dyno runs) and they said the car is runnin a bit lean.

What would this be from and how can it be fixed.

My Car is a 32 with a 26 conversion and remapped ecu.

white white smoke, oil, damaged turbo seal.

White steam smoke, blown head gasket due to running lean.

Possibly your injecotors are cloges, pump or fuel filter is on the way out

To test for head gasket, take it to a mechanic and do a gas analizer, this will tell you if there are any hudrocarbons in the radiator water.

To test for head gasket, take it to a mechanic and do a gas analizer, this will tell you if there are any hudrocarbons in the radiator water.

With the radiator, I am getting a new thermostat put in and the radiator fulshed, cleaned and new coolant put in.

Is there another way to check if the head gasket is or on its way to being screwed?

If the head gasket is screwed, what's a rough estimate to get it fixed?

Edited by URAS_33

when u start ur car is it early in the morning when its cold?? probs just the hot air hitting the cold air and creating the normal mist which all cars get when its freezing. Its funny how many people i know who got all scared that theyre car is puffing out white smoke when this is all that it is. just a lil food for thought. It may not be all bad. with the running lean probs ur fuel pump.

I did a search and couldn't really find what I am after.

When I start my car, there is a little puff of white smoke, and that's it. None when i'm driving or boosting, just on start up.

What would be causings this?

Also after that my exhaust has quiet a strong smell, it's had to tell what the smell is of - similar to burnt fuel, but this is constant.

I also had the car dynoed (not a tune or check, was just an open day dyno runs) and they said the car is runnin a bit lean.

What would this be from and how can it be fixed.

My Car is a 32 with a 26 conversion and remapped ecu.

A small amount of white smoke usually means the oil you're using is too light on start up.

Fuel smells nothing to worry about, probably just the seal to the fuel tank/pump, as it's known to perish on the r32 over time.

As for running lean that's bad... if you have a pfc or other ecu what knock reading are getting?

As for running lean that's bad... if you have a pfc or other ecu what knock reading are getting?

It just has the standard computer which has been remaped.

PFC is definatly the first on the cards and a good tune.

Yeah white smoke / steam is really faint and does disapate straigh away. I guess coz I'm new to the RB26 (only had a 25 before hand), I'm sketchin about every little thing thats goin on.

I also get white smoke on cold morning starts but i hope its due to LatinR33's explanation :P

Will have a proper look tomorrow morning if it lingers around or just disappears

Read from a site.

could be antifreeze when it is being burned it has a sweet type of smell and tends to dissipate in the air rather quickly
Sometimes when the head gasket goes it will produce a passage for the antifreeze to pass from the capillaries into the combustion chamber.
Answer 2

If the exhaust billows white smoke for a few seconds when first starting the engine after it has been sitting for a while, such as overnight, and then runs normally, it could mean that the rubber valve stem seals have perished - especially if the vehicle is a few years old and has done over 60/70,000 miles.

Another clue is: does the exhaust smoke smell like fresh, rather than burnt oil.

On cold engine starts, especially, the ECU will momentarily run a rich mixture to get ignition going, then thin it back to normal once the O2 sensor can get an accurate reading. The puff of 'smoke' probably has a sweet smell and would contain a small amount of poorly combusted fuel, some uncatalyzed exhaust, and likely a bit of condensation.
Remember it this way--if the white smoke doesn't go away, THEN you have a problem. If it disappears after a few minutes, it's just water vapor. Part of the chemical equation for the combustion of gasoline includes H20.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...