Jump to content
SAU Community

Apexi Rev Speed Metre Original

turbs33

By turbs33,
in Classifieds

 Share

Recommended Posts

turbs33 Community Regular

turbs33

Posted
Posted (edited)

Hi,

About 2 weeks back i purchased a original style Apexi RSM. I was brand new when I received it and I paid $118 delivered to my door.

Just yesterday I purchased a safc and blue screen rsm as a package so now I have the old rsm (which is basically brand new for sale.

I would like close to what i paid for it as I only used the thing for 2 weeks

$100 ONO delivered \local meet up if in brisbane

Does 1/4 mile times 0-100 etc

Has tyre size correction..

All the basic RSM features..

See manual here http://www.apexi-usa.com/pdfInstallation/14.pdf

Can supply pics if neccessary.......

Please note, sub loom (small loom on the right first pic) has been hacked at when I removed from my car last night (actually i used this to wire in my new rsm so I got away without going back to the ecu as they use the same wiring) everything else is perfect.. Just cut the plug off and extend the wiring..

Also will throw in an apexi rsm\safc stand for free.. 2nd hand just gotta clean the old double sided tape off and apply new stuff.

post-33138-1181723044_thumb.jpg

post-33138-1181723058_thumb.jpg

post-33138-1181723071_thumb.jpg

post-33138-1181723086_thumb.jpg

Edited by turbs33
Link to comment
https://www.sau.com.au/forums/topic/172580-apexi-rev-speed-metre-original/
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...