Jump to content
SAU Community

Help R33 Hard To Start And Idles High

avalanche

By avalanche,
in General Maintenance

 Share

Recommended Posts

avalanche Community Regular

avalanche

Posted
Posted

hi i have an r33 turbo that is hard to start when it is cold. I can get it to wind over, but it will not fire unless i hold the throttle open for a good 5 seconds, then it will cough and sneaze with black smoke until it starts and runs. after the car is warm it will start everytime easyily. the car runs perfectly. Has this got something to do with a cold start or something? if so were is it and how can i fix it?

Also when it is running the idle is at a high 1050 rpm. I have tried to lower it buy starting it then, disconnecting the brown acc plug, the winding in the acc idle all the way and reconnection the acc plug. i cant get the idle to run any lower. my ecu doesnt have the idle screw on it like others do. how can i lower it? help me pleaze

thank you

mark

Baconer Grand Master

Baconer

Posted
Posted (edited)

list out your mods, when this began or anything like that so people have some sort of idea

Did it have troubles starting before you wound back the idle screw? 1050 isnt too high, mine is around 1100 warm and around 1500 cold. Also how thick is the oil in your car (eg. 10W40)

Also, black smoke is usually related to fuel so not a huge deal to worry about, probably best to get it checked at a mechanics though

Edited by Baconer
avalanche Community Regular

avalanche

Posted
  • Author
Posted
list out your mods, when this began or anything like that so people have some sort of idea

Did it have troubles starting before you wound back the idle screw? 1050 isnt too high, mine is around 1100 warm and around 1500 cold. Also how thick is the oil in your car (eg. 10W40)

Also, black smoke is usually related to fuel so not a huge deal to worry about, probably best to get it checked at a mechanics though

Yes i did have a bit of trouble with starting it before wound it bak but ive put it back to were it was and there is no change.

i Hve GTX 2 in the car.

All the car has that is aftermarket it the exhaust and hks bov.

avalanche Community Regular

avalanche

Posted
  • Author
Posted
Is the BOV plumbedback? If not try putting the stock bov back on and see if that changes anything.

Also how thick is the oil, brand doesnt mean much :O

plumback? that like the suck type rite? yer its one of those. i dont have the stock bov with me. i think the oil is 20 w something not quite sure, but wat has oil got to do with it may i add?

Baconer Grand Master

Baconer

Posted
Posted

Plumback basically means it is 'plumbing' (piping) the pressure build up from the turbo back into the system. The HKS (guessing you have the SSQV) is an atmospheric BOV which is the opposite of plumback, so instead of it keeping the pressure buildup within the system it vents it out making the BOV noise. Atmospheric BOVs cause all sorts of stalling problems and may be part of the cause of your starting problems. Even though they sound pretty dam cool (i always wanted one :O) some people actually say they lower performance because the car has to build up the pressure after each gear change and bov vent. So try changing back to the stock or any other plumback system, can propably even plumback the SSQV so maybe look into that. Should be able to pickup a stock R33 BOV for under $50 on forums, just search around.

As for oil, if it is 20Wsomething then i'd bet some money on it being the cause of the starting problems. Its winter now and the mornings are cold so you add that onto the thick oil and its going to be tough for your car to start and would also explain why the problems disappear when the car is at operating temp. Try changing to some thinner oil (10W40) or even 0W40 and run it in for a while, post back here once you've tested those 2 things out and see how you go. Check out the 'goods on oil' thread for some more info on what oils are good.

4drftn Experienced

4drftn

Posted
Posted

i have nearly the same problem... if i take my car on short runs it wont start without pumping the accelerator when tryin to kick it over... i run mobil 1 semi syn 15/40, i have apexi bov on crossover but its not hooked up, i think its on the actulator...

dunno what ever sorts your problem may help me, unless its a different prob

avalanche Community Regular

avalanche

Posted
  • Author
Posted
i have nearly the same problem... if i take my car on short runs it wont start without pumping the accelerator when tryin to kick it over... i run mobil 1 semi syn 15/40, i have apexi bov on crossover but its not hooked up, i think its on the actulator...

dunno what ever sorts your problem may help me, unless its a different prob

yer mate im going to do up a diy turorial on the elemination process it took to fix it. it may help u of someone else thanks

ps it was quite easy to fix the air regulator withoout taking it out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...