Jump to content
SAU Community

Recommended Posts

Hey guys...

Just got my very first DSLR after catching the bug on my friends' Nikons.

Decided on the E510 as it comes with in-body image stabilisation, live-view (proven itself to be more a gimmick, as you can see what the lens sees, but for any focussing to occurr, it's gotta flip a mirror and do it's thing. Very time consuming) and subscribes to the 4/3s camp (people say it's better, but I couldn't really tell the diff other than the image ratio). Apparently the Olympus anti-dust mechanism is better than others (yet to fail after 3 days)

Got 2 lenses with it, both Zuiko (14-42mm) and (40-150mm).... but next ones will be Leica lenses.

Anyways, I'm only quite new to photography, but I'm keen to learn and take some nice photos when i got to Europe.

here's a couple of shots I took recently... please give feedback, as I'm quite a n00b

557243660_fa6a520d61_b.jpg

557243786_7bf68c6818_b.jpg

Link to comment
https://www.sau.com.au/forums/topic/173186-got-a-new-camera/
Share on other sites

  • 4 weeks later...

aye sash long tym no see. lets see you olympus go up with my sony alpha. still new to it but got some decent shots at the last DA event. still learning so its ok...photography is all about time (something i lack..need to get myself a watch)!

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...