Jump to content
SAU Community

Group Buy # 5 Arospeed Adjustable Cam Gears, By Popular Demand, By Popular Demand


Recommended Posts

G'day guys.

I have had heaps of people PM me to do another group buy, so ill do it

These are from Import Car Parts Plus in the USA.

GB: START 20/06/07 ENDS 20/07/07

What i found was some Arospeed USA RB20/25/26 Cam Gears.

Here's all the info on them - make sure you read all of this cause it'll probably answer all your questions.

These camgears are good for a RB20, RB25, RB26.

To keep the price down, I need to order 10 sets thats 20pcs in total. (Come only in Blue & Red Colour)

How to get onto this great deal"

You can do direct deposit into my account then I'll express post them to you. Both ways are fully tracked so they won't go missing.

Express post cost an extra $10 nation wide.

Cost Price of the cam gears is $185 for the pair, or $92 for 1 pc.

So total cost for a pair will be $185 + $10 postage = $195

This gb will end in about a month or before if we can get the numbers.

Ordering To order a pair, just put a post up here or you can PM or send me an email at [email protected] with your details.

Feel free to ask me any questions.

Also this is a price break i was given if more than 10 pairs are ordered.

10 - 15 pairs $175

15 - 20 pairs $165

20+ Pairs $155

So who wants to start the list.

Edited by r33kid
  • 4 weeks later...
  • 3 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...