Jump to content
SAU Community

Recommended Posts

Hi i am selling my RB26 gtr r33 block due to replacing with rb30 this block is in perfect working condition engine was still

running before i decided to pull apart engine block has never been honed or bored no markings in cylinder wall comes with crank complete rods, pistons oil pump no sump

QUICK SALE

Location Sydney Marrickville

Cost $1100 ono

contact via PM or call 0430-176-077

Edited by MR RB30
Hi i am selling my RB26 gtr r33 block due to replacing with rb30 this block is in perfect working condition engine was still

running before i decided to pull apart engine block has never been honed or bored no markings in cylinder wall

Location Sydney Marrickville

Cost $800 ono

contact via PM or call 0430-176-077

still for sale ?

  • 1 month later...
  • 3 weeks later...
Hi i am selling my RB26 gtr r33 block due to replacing with rb30 this block is in perfect working condition engine was still

running before i decided to pull apart engine block has never been honed or bored no markings in cylinder wall

Location Sydney Marrickville

Cost $800 ono

contact via PM or call 0430-176-077

Hey MR RB30

I'm keen - you have PM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...