Jump to content
SAU Community

Recommended Posts

Was having a disagreement with a mate on the w/e, i said that a 34 GTR front bar would not fit onto a Gt-t as GTR has a wider wheelbase & fenders. He reckons it does and has seen it done before. Can anyone confirm that for me? Im after answers from someone who has experience in this or done it themselves and not just a guess or wot they've heard from a friend of a friend.

We both agree that a GTR/aftermarket bonnet will be required for a GTR front bar.

Edited by G_Force
Link to comment
https://www.sau.com.au/forums/topic/174159-gtr-front-bar-on-a-gt-t/
Share on other sites

GTR34 front bar will not fit gt-t as it need the wider GTR guards. your mate was wrong.

GTR34 bonnet will fit gt-t along with GTR lock assembly and hinges. you do not need the whole GTR front end. Yes I have done it before.

Did you end up getting the Top secret bar front GTautostyle?

Cheers

GTR34 front bar will not fit gt-t as it need the wider GTR guards. your mate was wrong.

GTR34 bonnet will fit gt-t along with GTR lock assembly and hinges. you do not need the whole GTR front end. Yes I have done it before.

Did you end up getting the Top secret bar front GTautostyle?

Cheers

Thanks for that Forged, i knew the GTR had wider fenders. As for the Top Secret, still doing some research. Went on the GT Autostyle site and only front bar listed for a 34 there looks like a C-West one, its somewot similar to a Top Secret tho. See link.

http://www.gtautostyle.com/nissan/R34/cwest_f.jpg

I might have to email them for more info on the Top Secret one ur talking bout.

I was also hoping i could find that bottom lip they have on the Top Secret GTR, no luck so far unless one is willing to pay an arm for the real CF one. If anyone hears of where i can get this bottom lip to fit a Gt-t please pm me.

Here's a pic just in case anyones wondering wot im talking about.

post-25499-1182818905_thumb.jpg

the 34 on their website has c-west side skirts but definitely gtr style front bar not c-west.

the bottom lip is the only omission there. i dont know anyone who sells those neither. forget carbon fibre tho way too costly. try bodyform or jetspeed, if you got the bar their could probably custom make a similar lip for you.

cheers

the 34 on their website has c-west side skirts but definitely gtr style front bar not c-west.

the bottom lip is the only omission there. i dont know anyone who sells those neither. forget carbon fibre tho way too costly. try bodyform or jetspeed, if you got the bar their could probably custom make a similar lip for you.

cheers

Those side skirts look like Bomex to me.

Cool so that is the Top Secret front bar, thought it looked very similar. Yea might hav to get that bottom lip custom made.

Reckon those side skirts go with that front bar? How bout the rear bar, any idea wot would go with the Top Secret front?

honestly I don't think those side skirts match the trust front bar at all.

I went with Impul side skirts. reckless garage in Japan had a GT-T with Trust front bar, Impul skirts and rear bar when they first came out, looked very neat. I can try to dig up some pics for ya.

also more pics of the setup when my car is done.

honestly I don't think those side skirts match the trust front bar at all.

I went with Impul side skirts. reckless garage in Japan had a GT-T with Trust front bar, Impul skirts and rear bar when they first came out, looked very neat. I can try to dig up some pics for ya.

also more pics of the setup when my car is done.

U mean Top Secret, not Trust?? Yea if u find some pics of Impul skirts & rears, pm or post em.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...