Jump to content
SAU Community

Hr31 Coupe Wrecking

gaffa20882
 Share

Recommended Posts

gaffa20882 Enthusiast

gaffa20882

Posted
Posted

hey all, decided to wreck the car. parts are as follows:

R32 short shifter (cheap one off ebay): 50$

Older style HKS turbo (has had FULL rebuild costing over 600$, have to find reciepts, was told by rebuilder that its a 350-400hp turbo): $800

15" wheels (can fit 225*50*15's on them) pcw brand?: 100$

Front bar from a HR31 coupe with cutout for smic: $200

Cooler vent (copy one brand new): 50$

Full shell of car, all panels and glass and interior, brand new nissan s3 front bar (may take bars off): $1750 (also can be registered in australia)

Silver top RB20, comes compleate with everything (except afm) : 900$ w/out standard turbo and flywheel, 1200$ with turbo and fly

Fully reco'd RB20 turbo g/box, brand new everything inside of box: $650 (manual only had about 3000k's done on it)

2x Heavy duty clutches, 1 exedy (brand new can take up to 300rwkw just fitted to flywheel) other is usable: $500

PWR intercooler (600x300x76) retail for 680$ from repco needs brackets to be fixed: $300

Intercooler piping kit universal: $100

R31 House subframe bushes (brand new from japan genuine R31 House ones) retail for 500$: 350$

Brand new EBC greenstuff pads for Hr31 and aussie gts: $100

3" cat back exhaust Jasma brand, very nice sound: $300

HR31 manual drive shaft : 100$

Might have some more stuff for sale in further days/weeks

thanks

also pics will be up this weekend

*note: things that do not come with shell and im keeping:

- headlights

- Front struts

- wheels

- GTS grill

- FMIC

- Drive shaft

- Gear boot (leather one)

- tail lights

- exhaust

- and anything else i may want

Link to comment
https://www.sau.com.au/forums/topic/175457-hr31-coupe-wrecking/
Share on other sites
REV-031 Explorer

REV-031

Posted
Posted

Full shell of car, all panels and glass and interior, brand new nissan s3 front bar (may take bars off): $1750 (also can be registered in australia)

s3 front bar delivered to me please desperate i am

5072

gaffa20882 Enthusiast

gaffa20882

Posted
  • Author
Posted

Okay:

Update:

Shell will come with the original front bar, cooler vent, the RB20 silvertop, the manual g/box, the flywheels and clutches, the exhaust, full suspension (also with r32 front calipers) and driveshaft for 3500$ ono just email me or ring me on 0439481838

Im open to reasonable offers around this mark

If you want any pictures let me know or if you want to see it

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done.  
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
    • GTSBoy
      R34 manual conversion speed signal wire finding, need help

      By GTSBoy · Posted

      Yes. Autos typically work from the speed sensor on the pinion shaft of the diff. I also think that even if you have a proper speed sensor for the bog manual in the manual box, that the signal it outputs is not compatible with the auto dash anyway. You should consult that manual (the book, not the gearbox).
×
×
  • Create New...