Jump to content
SAU Community

Recommended Posts

My brother is wanting to purchase a bodykit for his 4dr skyline, its a series 1, I wondering if there is any difference between the 4dr rear bars and the 2dr rear bars? Apparently they are different, how?

Ummm not sure if this has been covered, did a quick search and couldnt find anything. Series 1 and 2 front bars are interchangable right? or do the lights and grill etc need to be changed in order to do it? Are Series 1 and 2 lights the same? series 1 looks more dull whereas the series 2 looks like it has chromey plastic stuff on the inside which makes it more shinny :)

~Danz

Link to comment
https://www.sau.com.au/forums/topic/176476-4-door-rear-bar/
Share on other sites

The sedan and coupe rear bars are different. The coupe's rear lights round off at the bottom where as a sedans lights are more of a 'boxy' shape. Not sure if that made any sense, but if you got a sedan rear bar and a coupe rear bar together, look at the bar where it would meet the tail lights. You should see the difference. Size, I'm not too sure about the difference.

As far as I know, the series 1 and 2 front are interchangeable. Only difference in the light is that, one has projector headlights and one has the 'normal' reflectors?

Link to comment
https://www.sau.com.au/forums/topic/176476-4-door-rear-bar/#findComment-3228776
Share on other sites

hmmmm ok, I can't really see the difference, probably cause the photo is too small:

r33skyline_4dr_r.jpg

33GTR_DoLuck_Rear_small.jpg

yeah I just checked on my bro's car, looks the same :P.

Ok, so the headlights are the same size otherwise, cool....

I've got a front bumper, not sure what series its from, I guess it doesnt really matter thought does it?

~Danz

Edited by Danzzigger
Link to comment
https://www.sau.com.au/forums/topic/176476-4-door-rear-bar/#findComment-3228876
Share on other sites

frt bar is the same as the coupe you can buy that from anywere

rear bar are almost the same as well u just have to shorten the

rear guard piece that goes to the rear wheels

That was taken from this thread: http://www.skylinesaustralia.com/forums/in...howtopic=165558

~Danz

Link to comment
https://www.sau.com.au/forums/topic/176476-4-door-rear-bar/#findComment-3230633
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...