Jump to content
SAU Community

Recommended Posts

Hey peeps i've got an r32 gtst with an rb20det. When i go to put my foot on it, it starts to spool but it also sounds like its leaking boost from somewhere as there's like a "pshhhhhh" noise and it seems like there's a little lack of power. Has anyone else experienced this or know what it could be?

Link to comment
https://www.sau.com.au/forums/topic/177709-rb20det/
Share on other sites

what boost is displayed on your boost gauge?

do you know what a turbo sounds like?

11psi. which is what its set to. yeah this is a really loud shhhhh noise tho..doesn't sound like a spool unless i'm on crack and have got it completely mistaken..but it feels like i lose power

Link to comment
https://www.sau.com.au/forums/topic/177709-rb20det/#findComment-3244105
Share on other sites

If you can see 11psi, then "if" there is a leak, it is after the turbo.

so being an RB, most probably a gasket leak at the turbo manifold.

My guess from this side of the monitor is that you have a bolt missing from the turbo to the manifold.

you might be able to just tighten replace and tighten it and it will go for a while longer.

"IF" there is a manifold leak, and you leave it, it will get worse as the whole in the gasket gets bigger.

eventually, it will start to sound like a lawn mower when idling.

"OR" you are most likely on crack and it's just the sound of an RB20 with exposed pod filter.

Link to comment
https://www.sau.com.au/forums/topic/177709-rb20det/#findComment-3246522
Share on other sites

If you can see 11psi, then "if" there is a leak, it is after the turbo.

so being an RB, most probably a gasket leak at the turbo manifold.

My guess from this side of the monitor is that you have a bolt missing from the turbo to the manifold.

you might be able to just tighten replace and tighten it and it will go for a while longer.

"IF" there is a manifold leak, and you leave it, it will get worse as the whole in the gasket gets bigger.

eventually, it will start to sound like a lawn mower when idling.

"OR" you are most likely on crack and it's just the sound of an RB20 with exposed pod filter.

ok cool. i'll have a look. I think everyone may be right i think it is probably only the pod induction. I was just wanting to make sure because i'm selling it..i'm not the most technical minded person and sometimes i can be a bit thick

Link to comment
https://www.sau.com.au/forums/topic/177709-rb20det/#findComment-3246829
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
    • I _think_ that one has a christmas tree or some other retainer spike into a hole in that panel under it. Come in under it with thin scredrivers and just pry it gently up. If you rip the ears off the retainer pin....so what? Just stick it back down after with a bit of race tape and carry on with life.
×
×
  • Create New...