Jump to content
SAU Community

Kangaroo Valley Cruise  

6 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

I would be interested in the level of interest in doing a trip down kangaroo valley & a cruise back up to Wollongong before heading up Macquarie pass?

It is pure Stagea country, with smooth flowing corners, awesome scenery and twisty uphill/downhill bits.

We could meet around 10am in the morning at Moss Vale (A saturday or Sunday, whichever is the most popular), cruise down through Kangaroo Valley, maybe have a lunch in Nowra & check out each others rides, then we could make our way back via a few different routes (macquarie pass, or back up through kangaroo valley if you like).

So.....anyone interested in such a cruise in the next couple of months?

Link to comment
https://www.sau.com.au/forums/topic/177728-kangaroo-valley-cruise-nsw/
Share on other sites

I personally wouldn't mind, Luke, but need to check availability.

I think the biggest problem is that most of the NSW crew live in or around Newcastle and the Central Coast, so it's at least an extra 2hrs travel each way for them...

Beauty Leshy, thats one at least.

I appreciate that there are a few guys a fair bit further north, but maybe we can organise a return trip out to the Wollombi pub on another weekend!

My brother in law lives on the Central Coast, so thats a future possibility.

that is a hell of a long way to go from newy it's at least 2 hours to the gong then what another 1 1/2 to kangaroo valley? but thats why we buy these toys isn't it to drive them :)

hell i am in as soon as the stag is back on the road will be at least another month maybee 2.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...