Jump to content
SAU Community

Recommended Posts

Hi,

I have 235rwkw@12psi heres the mods;

stock auto

Stock fuel pump

Stock Injectors

Stock AFM

Hi-Flow turbo (vg30 rear etc) on Stock manifold.

FMIC (hybrid copy)

Split Dump Pipe wrapped in heat wrap and 3inch exhaust

SAFC11 (A full replacement ecu would be better, but this does the job)

BOOST98 (ethanol fuel)

Pod filter with 2 cold air inductions.

Thats it..tuned by HITMAN..

There seems to be alot of variables between diferent cars, as the injectors,AFM and pump are fine. I have been running this set-up now for 5months and the only thing to start suffering is the automatic gearbox.

I will be installing a gtr fuel pump soon as it is not a great idea to push the limits of the fuel pump, but it has not hesitated yet. Id also not use the aforementioned as a basis to modify your car though it is an example of what can be done.

Cheers

lol thats funny but yeah,garantee u take that thing to a test n tune and u would be struggling to run 105mph 235rwkw is a nice bs figure,but i guess hitman has to keep his customers happy with nice dyno figures haha any other dyno ud be lucky to get 190rwkw wit ur mods..not baggin you but i can tell u now u dont have 235rwkw.

If i had to start all over again..

I would have got a aftermarket ECU first.. as well as suspension at the same time..

Then go for mods..

hate doing exhaust etc.. and then getting flat spots, running rich etc.. The car becomes slow and shit.. and you will hate it..

unless you got money to spend to do everything at once..

Exactly what i was thinking the other night. Stock car - wak a power fc or equivilant straight off the batt and it would be a much better setup than the other way round. You just dont think that way when you first buy your car though...

Hi,

Im at work atm but if you do a search on my username I have an entire thread dedicated to it + dyno attachments...if you read it, I only expected about 190rwkw or so hence why i didnt go forward with the usual mods of pump etc.

Cheers

I see, I'll check it out - thanks

  • 2 weeks later...

1OWRB,

you obviously have no idea..thanks for a useless attack and insult hero.

this coming from some1 that used a hi-flow on stock ecu and blew your engine, good stuff.

Ill keep this for archiving when I run at the 1/4 and get back to you...

Cheers Mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...