Jump to content
SAU Community

Recommended Posts

Wanted: all the water/oil/turbo lines and fittings for RB26dett.

Also pipes and hoses leading into and from the turbos.

If you have done a single conversion and have these parts lying around..I want them!!

Edited by RPMGTR
Wanted: all the water/oil/turbo lines and fittings for RB26dett.

Also pipes and hoses leading into and from the turbos.

If you have done a single conversion and have these parts lying around..I want them!!

I have the two metal intake pipes, and the stock dumps and exh maniflods.

check out the link in my sig for pics.

metal oil and water lines are sold, but everything else in the pics is still available.

Let me know if you see anything you need, and throw me a PM.

Cheers,

Beau

Wanted: all the water/oil/turbo lines and fittings for RB26dett.

Also pipes and hoses leading into and from the turbos.

If you have done a single conversion and have these parts lying around..I want them!!

I have the lines and some pipes , not sure what pipes you want though .

I have the lines and some pipes , not sure what pipes you want though .

I need the turbo oil/water feeds, rubber and ally pipes to and from the turbos.

Basically all the parts to complete the package, as we are returning the car to TT from single turbo.

Take some pics and I'll choose the bits needed.

cheers

I have the two metal intake pipes, and the stock dumps and exh maniflods.

check out the link in my sig for pics.

metal oil and water lines are sold, but everything else in the pics is still available.

Let me know if you see anything you need, and throw me a PM.

Cheers,

Beau

PM sent

I need the turbo oil/water feeds, rubber and ally pipes to and from the turbos.

Basically all the parts to complete the package, as we are returning the car to TT from single turbo.

Take some pics and I'll choose the bits needed.

cheers

I have the oil/water pipes, exhaust manifolds , heatshields, dump, pipes , turbos , the 2 alloy pipes of the turbos , the rubber pipes that join the alloy pipes and I can get the "twin turbo pipe for you too".

P.m. an offer on whatever you want and if offer is accepted I can supply pics as you want them .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...