Jump to content
SAU Community

Squeak/squeal?

Guest Des5001

By Guest Des5001,
in Suspension, braking, tyres and drivetrain

 Share

Recommended Posts

Guest Des5001

Guest Des5001

Posted
Posted

Hey i did a search and didnt get any clear answers.

i have a squeak when takin off when releasing the clutch and also the squeak comes in when goin down from 4th to 3rd and 3rd to 2nd, just when the revs have to climb quick. when i ride the clutch and release slowly it dont happen, what do u think it is?

also when i accelerate quick in first gear a loud squeal comes in, this is now startin to happen in 2nd, the belts are all tight so i doubt its them so is it something to do with the clutch? i have no idea what it could possible be!

thanks for your help

Link to comment
https://www.sau.com.au/forums/topic/179911-squeaksqueal/
Share on other sites
candy33 Experienced

candy33

Posted
Posted

I have exactly the same problem.. It started from when i installed my front mount and my Xtreme clutch. i Checked all my cooler pipes and its not rubbing, and my belts are also tight, so i think its my clutch aswell, as wen i ride the clutch it doesn't make a noise either.. Do you notice if the noise goes away after a few minutes of driving? or wen the engines warm?

Link to comment
https://www.sau.com.au/forums/topic/179911-squeaksqueal/#findComment-3276460
Share on other sites
  • 2 months later...
Luciano Veteran

Luciano

Posted
Posted

i have this problem also.

Squeals when i slowly release the clutch when reversing, and releasing when downshifting at high revs.

hasnt affected any performance, but its had me worried for quite some time.

My standard clutch never did this.

Only started after i installed the Xtreme heavy duty... occured about 3 months after use

I've had a suggestions such as replacing the thrust bearing (but havent got to that yet).

Has anyone diagnosed a similar problem?

Link to comment
https://www.sau.com.au/forums/topic/179911-squeaksqueal/#findComment-3432952
Share on other sites
Luciano Veteran

Luciano

Posted
Posted (edited)

that would explain it. I dont think the throwout was changed when i put the new clutch in. (i wasnt supplied with one - clutch fell off back of a truck!)

cheers for your help guys, much appreciated.

Edited by MSPEC33
Link to comment
https://www.sau.com.au/forums/topic/179911-squeaksqueal/#findComment-3441366
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...