Jump to content
SAU Community

trust td06-20

rob77

By rob77,
in Engines & Forced Induction

 Share

Recommended Posts

rob77 Veteran

rob77

Posted
Posted

I'm looking at putting one of these on my rb25det r33. I'm not sure of the exhaust housing yet, I might get that info tomorrow. Basically I'm after a couple of figures if anyone knows. Firstly running around 1bar of boost at around what rpm would I have full boost? Also any idea on what HP flow @ engine these turbo's are capable of flowing?

Link to comment
https://www.sau.com.au/forums/topic/18122-trust-td06-20/
Share on other sites
sidewaymambo Mentor

sidewaymambo

Posted
Posted

AD..I think japanesemotorsport.com.au for get to renew their domain registration..LOL

Rob.. There is a thread about trust turbo, you might want to read about it..here you are

Originally posted by Adrian_perth

rob go have a look on www.japanesemotorsport.com.au

i'm pretty sure their R33 Drift car(the red one) has a  Td06-20g in it and it put out like 319 rwks if i remember correctly ;)

adrian :)

Link to comment
https://www.sau.com.au/forums/topic/18122-trust-td06-20/#findComment-378330
Share on other sites
sidewaymambo Mentor

sidewaymambo

Posted
Posted
Originally posted by rob77

which turbo are you putting on sidewaymambo? Why did he change from the td06-20 to the td06-25g?

he sold the car with TD06-20g...and his current drive has td06-25g (T67)..with greddy plenum, manifold,bla..bla..bla..

I been on the passenger seat onec...awesome and I almost wet my pants...LOL

Link to comment
https://www.sau.com.au/forums/topic/18122-trust-td06-20/#findComment-378343
Share on other sites
sidewaymambo Mentor

sidewaymambo

Posted
Posted

AD..I have work slowly to meet my goal..let's cross fingers..

Initially I was planing to use stock plenum...but the top mount t67 hit the FMIC return pipe to stock plenum..consider instead modified the plenum or the FMIC return pipe..I might just get a after market plenum..and I am still waiting for it..damm..

Link to comment
https://www.sau.com.au/forums/topic/18122-trust-td06-20/#findComment-378381
Share on other sites
RS500 Experienced

RS500

Posted
Posted

Steve & all,

correct. there was a comparison done in Zoom Magazine (issue ???) where they used the Trust T67 (oil-cooled, bush-bearing turbo) & Apexi RX6 (ball-bearing turbo) on the same car, where the Apexi was found to give almost 20rwkw more mid-range power but lacked in top end due to having a smaller exhaust housing.

power made with the T67 was about 304rwkw at 1.5Bar with a nice fat power curve, whereas the Apexi made about ~280rwkw with (as mentioned) better mid-range power.

Can't remember off the top of my head which issue it was. will check and reply here.

Also, fyi, i believe fullboost was seen at about 4500rpm with the T67.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/18122-trust-td06-20/#findComment-379532
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...