Jump to content
SAU Community

Recommended Posts

tell him u want all GENUINE nissan parts BRAND NEW... they cost a bundle if u dont know where to go... the guys at palm get in all new parts and order them from japan... should bump the price up a bit.

i agree tho i wouldnt want it to go anywhere that they want u to depending on what insurance company ur with

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384190
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

I'm with just cars at the moment. But the place that they are sending me to just sounds like your average local body shop. So i will have to us the genuine new parts deal.

Palm told me that the both back quarters and the roof would need respraying. I hope that others think the same.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384242
Share on other sites

if they want to do it properly then they will have to... depending on how badly damaged the back is if they have to make any repairs to the rear qtr panel then they will need to blend the paint thru the back and roof... if it goes further back then they will have to blend it thru the doors.

i used to be a panel beater/painter so i know a few tricks of how to do it properly and dodgily :P

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384252
Share on other sites

It is hard to say how damaged it is. It looks like it has popped out the sides a little, but really not a huge amount. The bumper is totally stuffed, the lights are now away from the panel, and the back panel has been pushed in a bit.

I guess that you could do the dodgy and just repair the bumper and the rear panel without fixing the rest. I guess that I'll just have to assume that they will do a good job, and if not, i'll worry about it then. Not the best way to go, but with the lack of knowledge that i have, what more can i do.

I'm sure that they won't try and screw me over.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384286
Share on other sites

  • 3 weeks later...

im still waiting to take mine down... have to try and get my ****ing seats in before i can drive it down... its almost primed and ready for paint... its just these bloody seats that im waiting for!

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-414922
Share on other sites

I dropped down last night to see what was going on and was amazed at what he showed me.

Not only is the rear panel destroyed, the actual floor of the boot is all warped. I didn't think that the damage was that bad. When i say warped, i really mean it. Con told me that you guys had been down and seen the car.

Also told me that Just Cars are being rather difficult for him, so I'm going to have to give them a call today and sort them out. I'm really missing my car.

The exhaust is also pretty messed up, so I'm going to get that replaced with a bigger system. I was going to do it anyway, and now it will cost me less.

Whistla, what sort of spoiler are you going to be putting on your car?

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415075
Share on other sites

typical insurance arseholes... always making it harder than it needs to be. i was very tempted at one stage to just go and get a VT SS cause the insurance was 1500 cheaper even tho it had more power than my car.

its prejedice i tells ya!! (yeah i cant spell, i know it already)

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415238
Share on other sites

no panel shop can afford to cut corners today

Why not?? for insurance jobs though I guess..

Anyway, seeing as body shops, painting and things are a common occurance for us skyline owners it would be nice if we could tee up some form of sponsorship so we get cheaper rates, in return for some advertising or something. Other clubs have a similar arrangement.

So far I've been quoted $300 for my bar resprayed - reckon Palm will be able to match or better that? Not so keen about my car being away for 2 weeks, as I don't have a "spare" car sitting around unfortunately.

When i get my bond back from my old place, I will finally get my bumper and grilled resprayed - only been 3 months or something!

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415240
Share on other sites

i gave the insurance company a call today and got them all sorted. It is so hard to be mean to some people when they are being so nice.

They originally told me that i had to get 2 quotes for them, then when i call them today, that said that i only needed the one, and one from Palm would have been enough. If they had of told me this 2 weeks ago, it would have all been fixed now.

I'm sure that if we spoke to the guys at Palm, they might do something for us. There is enough of our cars there already.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415250
Share on other sites

  • 4 weeks later...

Ok. so getting sick of waiting for my car. It has almost been 4 weeks for a 2 week job. I know that the insurance company slowed them down a little when they had to get something else assessed, but this is not funny anymore.

I've sort of gone easy on them as they are replacing the exhaust with a bigger one for me, and touching up a few areas, but maybe it is time to get on their backs a little.

I've been told that I'll get my car back this Friday. I guess that i'll have to wait and see. I'm not holding my breath though.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-454644
Share on other sites

Originally posted by Arsn

Ok. so getting sick of waiting for my car. It has almost been 4 weeks for a 2 week job. I know that the insurance company slowed them down a little when they had to get something else assessed, but this is not funny anymore.

I've sort of gone easy on them as they are replacing the exhaust with a bigger one for me, and touching up a few areas, but maybe it is time to get on their backs a little.

I've been told that I'll get my car back this Friday. I guess that i'll have to wait and see. I'm not holding my breath though.

trust me mate the wait will be worth it.... i seen ur car when i went down there and i seen the job they done... they did it properly.... cut off the rear and welded a new wall in rather than pulling out the wrecked one and patching it up.

the jobs ive seen them do ddown there are quality.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-454962
Share on other sites

hehehe i know how u feel about wanting ur car back... i want mine back on the rd SO BAD!! :)

but yeah man from what ive seen they are doing a good job which is why im going to end up getting m ine finished there instead of where i was going to get it done cheaper.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-455033
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...