Jump to content
SAU Community

Recommended Posts

hey guys, just wondering if anyone else has had this problem before, i was racing my car at the drags and had no traction so i ran a 14.6 at 163km/h but anyways when i went to do my 5th run for the day i hit 4th gear and it just didnt wanna rev like it had lost all its power wouldnt gain speed or rev's. and im pretty shore while i was holding threw 3rd it was pinging i could hear a slight taping noise all the way threw 3rd. now i just wanna know why i had no power in 4th?????? it was 1.30pm and probly 30'c max that night i went for a drive and went threw all the gears hard and it didnt miss a beat pulled all the way threw 4th ??????? whats going on

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/
Share on other sites

1400r. oh thats very helpful info i didnt think the ecu did that on the skyline never read about it b4 thats all but it makes sence, thanx for your help guys i guess i need to run it on dyno again n get a retune, the last place that did it are a bunch of ................. only went there cause they are the only place in my town with a dyno but i will travel this time

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/#findComment-3297438
Share on other sites

the intake sucking closed can be fixed pretty cheap.

search for "intake" by user "rev210"

he had a little article about his simple and effective fix.

also, if you could hear pinging while drag racing, with a helmet... it must have been pinging pretty farking badly..

and it would explain why the ecu woudl retard the timing so you couldn't kill the motor.

I'd definitely have it checked on a dyno to see how the current tune is..

is it tuned?

is there an aftermarket ecu in there?

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/#findComment-3302711
Share on other sites

here is the link for the intake mod

http://www.skylinesaustralia.com/forums/in...9&hl=intake

stock ecu and 11 psi and pinging..

where exactly are you?

just go to any dyno place to do a power run and ask to get a print out of your A:F ratio reading.

normally a stock ecu'd R33 goes rich.. if your's is leaning out, it might be a fuel pump/filter/injector issue.

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/#findComment-3303038
Share on other sites

5hrs up the coast from brissy Gladstone. . . There is only 1 dyno place in town and they know bugger all. Charged me $60 to clean the T/B when i figured out all they used was a can of T/B CArby cleaner for $6.00

yeah thats not a bad idea, fuel pump/filter/injector. going to do a compression test, then go from there i think.

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/#findComment-3303198
Share on other sites

hey guys well i do have a piggy back computer its an safc it is tuned well was about 3 mnths ago so yes i think im up for a retune but dnt want to go anywear hear again. thanx for all the input guys and yeh im not 100% if it was piniging or not but only one way to find out i guess (dyno)

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/#findComment-3303434
Share on other sites

GTST, i have a print out and i scaned it but it didnt bring up the numers like on the x and y axis and it wnt upload it for sumreason from wha ti can see it runs approx on 12 till the car hits 120kmh then it dips to 11.5 and slowy rises back up to 12 towards 170kmh, and no there has been no modifications since this tune all i have done is change the oil and its running the same oil just new stuff, it had new plugs gapped at 0.8mm and the mods include fmic/3inch dump pipe/3.5inch cat back, stock cat, apexi safc, pod filter, boost controller set at 11.5psi

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/#findComment-3306256
Share on other sites

if it is the intake sucking closed, you can do the mod in the link above.

it will cost you next to nothing.

but the only way to see if it is sucking closed is on a dyno.

or remove bonnet, strap a mate on the front guard, then go for a fang and ask him what he can see.

could be fun.. ;)

Link to comment
https://www.sau.com.au/forums/topic/181485-no-power-in-4th/#findComment-3307137
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...