Jump to content
SAU Community

Recommended Posts

Car:

1992 R32 GTSt M-spec

Stock dark blue – rare colour that only 5% of R32’s came out in

Imported in 1998 with normal compliance (this is NOT a car imported under the 15yo rule)

Engine/Transmission:

Rb20det with 150,000 genuine kms,

4sp Automatic with MV automatics stage 2 shift kit and 2800rpm high-stall torque converter. This retains the converter lockup. Large front-mounted transmission cooler. (if you don’t know what this all means, just ask me – the transmission mods make the car very nice to drive and the car chirps the 9” rear tyres between gear changes in the dry!)

Engine mods:

Rb25 series 2 turbo (nylon compressor wheel, ceramic exhaust wheel),

FMIC,

tomei poncams 256deg,

HKS cam gears

3” stainless split front/dump pipe, 3” stainless cat, 3” cat-back with stainless cannon muffler

Splitfire coilpacks

Walbro in-tank fuel pump (supplies more than enough fuel flow for the car)

Tuning:

Full live ECU tune of the stock ECU through Nissan edit at Mercury Motorsport using Dr Drift’s software – made 155rwkw with 12:1 AFRs with a conservative tune to maintain reliability

98-octane BP ultimate or shell v-power the only fuels used EVER.

The cam gears, turbo selection, and tuning have been designed to bring boost on as early as possible. This makes the car very nice to drive on the street with a LOT of midrange torque.

Body:

GTR front bumper with N1 air vents (stock polyurethane plastic, NOT fibreglass!), M-spec sideskirts and rear pods. M-spec rear spoiler. Clear front + side indicators

Volk F-zero challenge rims with 90% tread Nankang NS-II tyres. 18*8 at front and 18*9 at rear. Wheels have been polished professionally and look amazing. These wheels + tyres on their own are worth over $2500 and suit the car 100% perfectly

The guards have been rolled at the rear to accommodate the 9” wide rims and 255 tyres

35% tinting sides/rear with lifetime guarantee from tint-a-car

Brakes and Suspension:

Bilstein setup form the SkydeyKid group buy, lowered 25mm to a legal ride height (this suspension alone is worth $1500 and is very high-quality)

Whiteline caster kit

Super-pro polyurethane bushings

Front and rear strut braces

Bendix ultimate pads on stock M-spec brakes (4-piston front, 2-piston rear)

Brake master cylinder brace

Brake fluid changed in January 2007 using motul fluid

Interior:

Leatherette seats, in ivory/cream (rare!) with matching handbrake boot

Black car mats with Nissan logo’s

Aftermarket steering wheel (Nissan) and aftermarket automatic gear knob

Oil pressure and boost gauges

Pioneer head unit with inbuilt CD player/radio and additional 6-stacker in the boot. Comes with remote control.

Climate controlled air conditioning converted to new aircon gas. Re-gassed in January 2007.

Alarm:

4-point immobiliser with alarm and back-up siren. Also remote central locking that works with the alarm in one press of a button. Intergrated digital turbo timer that works in sync with the alarm

Maintenance:

Motul turbolight oil + filter changed every 5000kms

Automatic transmission fluid changed every 20,000kms

Spark plugs and fuel filter regularly monitored

Timing belt changed at 140,000kms when cams installed (gates racing timing belt)

All major servicing up to date including full 100,000km service done at correct time.

SOLD ! !

The parts used are of high quality (not cheap crap) and this is the most amazing R32 to look at and to drive. The car has been setup to have lots of midrange and the turbo comes on very early. The car also looks amazing and is very comfortable. Plus, it has that great rb20 sound, enhanced at idle with the cams making it sound like a bulldog rather than a pussycat!

Selling due to the fact that I have just bought a 2003 V35 350GT!

This car made me very happy for 4 years and I hope that it can continue to make someone happy for a long time to come.

Cheers,

Warren

post-2094-1189214472_thumb.jpg

post-2094-1189214487_thumb.jpg

post-2094-1189214500_thumb.jpg

post-2094-1189214512_thumb.jpg

post-2094-1189214523_thumb.jpg

post-2094-1189214533_thumb.jpg

post-2094-1189214541_thumb.jpg

post-2094-1189214554_thumb.jpg

post-2094-1189214569_thumb.jpg

post-2094-1189214580_thumb.jpg

post-2094-1189214589_thumb.jpg

post-2094-1189214604_thumb.jpg

post-2094-1189214612_thumb.jpg

post-2094-1189214625_thumb.jpg

post-2094-1189214638_thumb.jpg

post-2094-1189214650_thumb.jpg

post-2094-1189214662_thumb.jpg

post-2094-1189214675_thumb.jpg

post-2094-1189214686_thumb.jpg

post-2094-1189214696_thumb.jpg

Edited by WazR32GTSt
Link to comment
https://www.sau.com.au/forums/topic/184136-1992-r32gtst-dark-blue/
Share on other sites

why the 89 dash?

do you mean the blue gauges?

blue gauges wasn't only series 1, as i understand it was dependent on the car colour also

...but let's keep it on the topic of people buying my car!

any other stuff feel free to PM me

Edited by WazR32GTSt

carsales

got a few tyre kickers in the end that had NO idea but the guy that bought it realyl appreciates the volks/bilstein etc that it has and actually knows that its worth significantly more than just a normal auto skyline (which can be had for 8g or less)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...