Jump to content
SAU Community

Recommended Posts

All parts available at the moment, i have made a short list of parts, but if theres something that you want and i havn't listed it pm me.

located in Clayton, S.E Suburbs

Take the lot for $600 (- brakes, bov)

Parts available

Front calipers, rotors, pads $400

Brake master cylinder $80

Diff was 300 Now: $250

Tailshaft was 150 Now $100

CLutch Master Cylinder was 100 Now $70

Full doors was 500 Now $150

Cabin Light was $30 Now 10

Passenger Seat (cleanable stain) was $120 Now 50

Drivers Seat was $150 Now 80

Roof Lining $30

Carpet $40

Jesus Handles $20 pair

Vents $10 each

Handbrake $120

Passenger Window Control $80

Handbrake Skin $10

Under steering wheel plastic $20

Indicator Stalk $50

Wiper Stalk $50

Sports Wheel & Boss kit $100

Steering Column Surround $30

Rear view mirror $20

Fusebox $30

Seatbelts $50 pair

Rear Seatbelts $30 pair

A Pillar plastics $50 pair

B/C Pillar plastics $60 pair

Front wipers and motors $60

Rear wiper and motor $60

Washer bottle $20

Overflow bottle $100

Air Conditioner (full system) $100

Rear window $100

Drivers window $70

Passengers window $70

Drivers ¼ window $40

Passenger ¼ window $40

Added: 1 x stage2 BOV with adapter for 33 and possibly 32/34: Asking: $150ONO

post-22920-1193925157_thumb.jpgpost-22920-1193925021_thumb.jpg

Photo's: taken off due to loading time, PM for pics

post-22920-1189432965_thumb.jpg

post-22920-1190989712.jpg

post-22920-1193140011_thumb.jpg

post-22920-1193140065_thumb.jpg

post-22920-1193140255_thumb.jpg

post-22920-1193140412_thumb.jpg

post-22920-1193140461_thumb.jpg

post-22920-1193140555_thumb.jpg

post-22920-1193924974_thumb.jpg

Edited by Taso84
Link to comment
https://www.sau.com.au/forums/topic/184498-all-sold-sorry-guys/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Do you have the B pillar interior plastics?? The bit between the front doors and the rear 1/4 glass? Some moron installed tweeters there in my car and I want to replace em....

Just the top parts between the glass... never looked at em closely but I imagine its two seperate pieces!

yes selling the whole thing 2gether, do u want drivers or passenger seat?

Price has been posted

cheers

Both sides please! Can you PM details

Cheers,

Anna

  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...