Jump to content
SAU Community

Msct Present Tassies First Ever Tandem Practice Day

PHaT MR30

By PHaT MR30,
in Events

 Share

Recommended Posts

PHaT MR30 Grand Master

PHaT MR30

Posted
Posted (edited)

The Motor Sport Club of Tasmania are proud to bring you Tasmania's first ever CAMS sanctioned tandem practice day. Open to anyone from first timers, through to seasoned regulars.

WHERE: Symmons Plains Raceway

WHEN: Saturday October 27

TIME:

The plan for the day is as follows:

Gates open 8am

Scrutineering commences at 9:00am

Drivers Briefing 10:00am

Observation Lap 10:15am

Single Car Runs 10:30am

Lunch 12:30pm

Tandem runs 1:00pm

Track closes 4:30pm

Track Sweeping 4:35pm

Trophy's Presented

Gates close 6:00

LICENCE REQUIREMENTS:

A CAMS 2NS or 2S licence is required. We are investigating 2SE registration on the day. (upgradable)

GENERAL REQUIREMENTS:

Cars will be fully scrutineered on the day, and it will be the highest level of scrutiny to date.

Therefore it will be important for EVERYBODY to read these following documents

Supplimentary Regulations

Scrutineering Preparation Tips

CAMS Standing Regulations for Drifting

ENTRIES:

Entry costs will be $65.00 for early bird up to 22nd October and $85.00 after 22nd October and on the day.

Entry Form available here

Entry forms will also be available from local businesses (TBA).

OTHER INFORMATION:

- We are negotiating a tyre fitter as we speak, however this will not be just for your convenience. It is expected that you make the effort to get tyres fitted prior to the event and only use this service in the event you run out on the day. (Still looking for one).

- In the afternoons Tandem session, you do NOT have to run tandem if you don't feel comfortable. The director has the right to exclude person's from running tandem if he feels they aren't capable. You will still be able to have single runs in between tandem runs.

- A BBQ lunch and drinks will be available when we take a lunch break around 12:30

- 2 Trophy's will be presented on the day. These will be: Directors Choice and Scrutineers Choice (To be presented after track cleaning).

- Any driver(s) and or spectator(s) will/can be asked to leave the track if found not following instructions of the day or found to be endangering themselves and others.

This can and will result in the person being banned from the track and future events.

Any queries dont hesitate to contact me or Damo.

Tim

Edited by PHaT MR30
  • 3 weeks later...
NISSANGTS Mentor

NISSANGTS

Posted
Posted

Hi damo

Some of us old grandpa's should be able to wipp your young butt.

Seriously thou if i get back on the track just for one day i may get hooked and get back into club days.at this point in my life i have money to own my gtr and travel,with no kids at home life is bloody great.

stuart[r32 gtr]

DJRIFT Veteran

DJRIFT

Posted
Posted
Not if you hit something :D:thumbsup:

ah thats where all the skill comes into it that all the track racers say drifters havent got. its a different story when you hit the hump at 120+ km/h and you are trying to unsettle the car.

its not the best fealing but it beats going in a straight line to the next corner. haha. na i dont mind either and i will more than likely be at the track day the day after this day having a fun day of driving.

be good if some of you guys atleast come out and had a look. it should be a big day as we are trying to put a lot into it and incorage people to get out there.

there will also be a BBQ at lunch time if you are scared of hunger.

seriously thoe wog boy if you came out for a few quick laps sideways you would be possibly the first person in tas to have drifted an r34. but im sure you dont care. oh and i could all most 100% garente that all the snappers would be lapping it up as they take favor to cars like yours.

Wogboy Mentor

Wogboy

Posted
Posted
ah thats where all the skill comes into it that all the track racers say drifters havent got. its a different story when you hit the hump at 120+ km/h and you are trying to unsettle the car.

its not the best fealing but it beats going in a straight line to the next corner. haha. na i dont mind either and i will more than likely be at the track day the day after this day having a fun day of driving.

be good if some of you guys atleast come out and had a look. it should be a big day as we are trying to put a lot into it and incorage people to get out there.

there will also be a BBQ at lunch time if you are scared of hunger.

seriously thoe wog boy if you came out for a few quick laps sideways you would be possibly the first person in tas to have drifted an r34. but im sure you dont care. oh and i could all most 100% garente that all the snappers would be lapping it up as they take favor to cars like yours.

LOL! I get sideways enough on track days. That's enough for me. I'll be heading to Baskerville on the 14 for another track day. :thumbsup:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...