Jump to content
SAU Community

Recommended Posts

Very specifically I require;

A speedometer and speed sensor from a 1989 model R32 GTR. A 1990 model may be sufficient also but the speed sensor must be of the 3 screw sensor!

If unsure what the speed sensor is...

When you open the cluster up (a few small clips that simply pull open, but can be pushed back shut), when you undo the speedometer the speed sensor can be found on the back of the speedo unit, pictures are;

http://www.skylinesaustralia.com/forums/index.php?showtopic=152998

HERE

Anyway PM or email (best) [email protected]

Edited by Keeper
Link to comment
https://www.sau.com.au/forums/topic/185774-r32-gtr-speedometer-1989-model/
Share on other sites

I've got what you need. Speedo cable and speedo instrument out of early gtr. (my cars donor parts).

$220.

PM if you still need.

If you live in Bne you pick and choose the exact one you require. as i have a few.

Cheers

  • 1 year later...
I HAVE A CLUSTER IN BRISBANE $175

can you confirm it is a 3 screw sensor unit by taking a photo of the back of the odometer assembly under the rear cover please? i have purchased a couple units now and neither have been as advertised

quik question since you seem to know a bit about this

i have been told you can tell what type it is by the color of the wiring/schematics on the back of the cluster ??

cheers

dont think so, you can get that rear cover off with about 2 mins labour tho

can you confirm it is a 3 screw sensor unit by taking a photo of the back of the odometer assembly under the rear cover please? i have purchased a couple units now and neither have been as advertised

I SEE WHAT U MEAN MATE.. SORRY ALL MY ARE 2 SCREW

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...