Jump to content
SAU Community

Recommended Posts

Hey guys, i was just wondering i'm here in rainy melbourne and i dont do it often but sometimes if there is an a wide open road with a highly visable corner i'll play drift.

My amature technique is to hold the clutch in 2nd or 3rd, give it a bit of revs and let her rip whilst throwing a bit of opposite lock, it works a treat.. but there must be other ways of setting up a drift?

I was also wondering does anyone in Victoria hold drift track days, i'd like to practice more on a track rather than on the street.

And lastly are the skylines easy drifters?

cheers

Anthony :)

Link to comment
https://www.sau.com.au/forums/topic/1868-drifting/
Share on other sites

  • 2 weeks later...

Depends what sort of skyline you mean. 32's seem to be pretty good, not many people drift 33's are they're pretty heavy, and no one really drifts 34's cause they're so expensive.

That doesn't mean it can't be done though.

That's pretty much the easiest way to drift, if it's a really big wide long corner, just hit it at pace and turn hard, if it's wet the bum should come out a bit and spin the wheels and the car will come sideways. I don't know about Victoria, but we had a skidpan day up here recently, my car was broken and I couldn't go :) but that's basically all the day was.

Link to comment
https://www.sau.com.au/forums/topic/1868-drifting/#findComment-41530
Share on other sites

Guest Simon-MrRx7

acctualkly its safer in the wet.. easier to break traction therefore speeds are lower, if u loop it u just usually spin out in ya own car length..

when its dry your pushing it harder and faster... if u loose it.. cange are u gonna hit something harder.

Wet is also better for tyres :)

i was once getting a new set of rear on my rx7 every 2nd week :(

Link to comment
https://www.sau.com.au/forums/topic/1868-drifting/#findComment-42444
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...