Jump to content
SAU Community

Recommended Posts

I'm selling off my RB25DET S1 with Series 2 turbo, due to money requirements elsewhere... I only recently bought the motor and it's a shame to sell it off :D

For Sale

- RB25DET complete motor including engine loom and computer, manifolds, Series 2 turbo, stock dump pipe, alternator and power Steering pump. Everything is to go.

Motor has done 101,XXXkm's and had the timing belt changed (gates racing timing belt fitted) aswell as the ideler pully and the water pump.

NGK Iridiums spark plugs are installed.

Series 2 Turbo is in excellent condishion with very close to NO shaft play.

I'm also going to included an near new turbosmart BOV...

NOW ONLY $2400

I'm in ADELAIDE.

If your interested please call me, Aaron, on 0438 86 08 07. Ringing or Messaging me is better than a PM because i'm not on the computer too much...

Cheers Guys

P.S. Sorry no photo (You all know what they look like)

Edited by R32Dreamer
Link to comment
https://www.sau.com.au/forums/topic/187465-rb25det-for-sale/
Share on other sites

I would never strip down a 100% perfect motor just to sell the block....

But I MIGHT be able to source you one.

Let me know your price range (please no stupid offers) and I'll see what i can work for you.

Cheers

how do you know the mileage of the engine if you just bought it?

hasnt been rebuilt at all? what type of car was it in?

i cant believe its lasted 100000+ seeing as ive lost 2 in 17000km.

i am interested for sure. though ive got one closer to home with 65000 for the same price. would you consider $2000?

(ill pay for shipping to syd obviously.)

how do you know the mileage of the engine if you just bought it?

hasnt been rebuilt at all? what type of car was it in?

i cant believe its lasted 100000+ seeing as ive lost 2 in 17000km.

i am interested for sure. though ive got one closer to home with 65000 for the same price. would you consider $2000?

(ill pay for shipping to syd obviously.)

My RB25DET has done over 95000kms and I get good compression across all 6 cylinders. My brothers the same. What do you do exactly to your engines that they only last 17000kms?

My RB25DET has done over 95000kms and I get good compression across all 6 cylinders. My brothers the same. What do you do exactly to your engines that they only last 17000kms?

honestly i have no freakin idea. i never even got around to upping the boost. they were running stock with only a pod and 3" turbo back! the first one was caused by leaning out. and the second one, well i dont know yet, im going to have to get it towed. if its the same leaning out then wouldnt that suggest the fuel system is f**ked? it used to backfire when changing gears though, which would indicate to me its running a little rich if anything.

the first engine lasted 77000km, but only 7000 of that was since i bought it. the 2nd was a full reco, and that lasted 10000. and took the turbo with it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...