Sold

[huddy]

sold

Edited October 14, 2007 by huddy

[huddy]

must add, that this was making full boost by around 3600, on my rb20 based engine.

this would be awesome on RB25 (the pink ADD cefiro with rb25 had this setup and was making 250+rwkw!)

[skylinecouple]

I'm considering this turbo or rebuilding my hi-flow. How much shaft play ? I don't want to have to rebuild it after I put it in. 240kw seems low, and a bit worried would have to screw 20lbs into it to get the numbers. Want 250kws. Very hard finding a VG 30 housing for a good price for my R33.

[krzysiu]

i had a 2540 on my r33 with supporting mods pulled 249.1rwkw @ 16Psi if that helps

Edited October 12, 2007 by krzysiu

[huddy]

skylinecouple - my engine is based on the rb20 and the fact it is low comp, means it requires more boost than a standard engine to make the required power.

shaft play isn't abnormal, it is minimal, the wheel spins freely and doesn't blow any smoke.

also because my engine is rb20 based (standard head as far as i know etc) it flows differently to rb25. The rb25 would be able to obtain the same reading on lower boost because of the compression difference. Another thing to take into account is that i could easily of made 280rwkw at a different dyno hence why i added dyno is renowned for reading lower than most.

krzysiu - thanks for the post good to give feedback on the potential of these. for how easy they fit and the performance they deliver its good to get feedback from others that have fitted them.

cheers

-Matt