Jump to content
SAU Community

Dish Wheels 18x8.5/18x9.5 $$1000 Vertec Manary Sports.

mr324doors
 Share

Recommended Posts

mr324doors Collaborator

mr324doors

Posted
Posted (edited)

WHAT IS IT.. hey all for sale are my vertec vrs manary sport wheels,

DETAILS... got these from japanese motor sport for my aristo, but wrote it of before i got them on it.. payed 1400 from J.M.S, and then payed another 140 bucks to get a buckle taken out of one.. there 18x8.5 fronts and 18x9.5 rears, with an ofset of +45,the rears have nice dish and the fronts have a little less but still very nice wheels.

CONDITION...in good condition, they do have a few gutter marks but nuthin to bad really,they come with tyres but there all pritty stuffed..

WHERE AM I... im in victor harbor,SA, but will post any where u like..

PRICE..1000 firm..

PICS..post-35845-1192422909_thumb.jpgpost-35845-1192423046_thumb.jpgpost-35845-1192423193_thumb.jpg

CONTACT ME..PM ME OR MSG/RING ME ON 0402 675 675

Edited by mr324doors
mr324doors Collaborator

mr324doors

Posted
  • Author
Posted

come on ppl, the price ant goin to move.. there cheap 18s, and they look tuff, i dont want to sell them i just got nuthin to put them on any more..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Duncan
      NC MX5

      By Duncan · Posted

      Perfect day for a pie, really needs a soft top in this weather though
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Prime parking, she is a little girl...LOL
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • sonicii
      Anyone running the VQ37VHR with forced induction?

      By sonicii · Posted

      I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...