Jump to content
SAU Community

Recommended Posts

MA - do a search in the Maintance section of this forum for "diff oil for a 2 way diff".

I've got a 2 way in mine too, and after a lot of phoning around and talking to people I found a way of loosening it up a little.

2 way diffs are sensitive to the type of oil that you use.

Basically it comes down to the following;

Drain and flush out the oil in the diff the best you can.

Go into your local Nissan spare parts dealer and buy the diff additive that they use in the new Nissan Patrols to stop diff chatter - this will cost about $75 for about 300ml !!!!

Put the diff additive in and then fill up (about 1.3 lt) with LS90 grade diff oil.

It'll take about 500-1000km for it to work properly.

I found that doing this has reduced the diff chatter by about 50-60% !!

The diff still locks up if you accelrate hard, but it doesn't lock as fast as before.

The problem is that this method won't work with all 2 ways cause there are different types (rod type, clutch type etc...).

I decided to bite the bullett and try it out ($100 in oil to try it out is alot of money !!), and I'm happy with the outcome.

Now if I drive calm the diff is almost like normal, but give it a boot full and reep the benefits of a 2 way :)

Or you could just change it over to a normal diff - it's up to you.

I went the path of the oil cause I could do it myself and it was easy. Much less hassle than buying a stock one, getting it installed, and then trying to sell the 2 way.

Good luck

J

This may sound like a dumb question - but I know 2 way Nismo Mech diffs are better coz they are 2 way - but what does a 2 way do that a 1 way doesn't???

I thought the 2nd way was decelerating is that correct? And how many people decelerate under the same amount of power they accelerate with through a corner??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...