Jump to content
SAU Community

Recommended Posts

i always thought it was:

FWD is around 10-15%.

RWD is around 15-25%.

AWD/4WD is around 20-30%.

but this also all depends on if its an auto or a manual.

Well 206kw R34s godown to about 150rwkw. Take off about 60kw

300kw HSVs dyno at about 225rwkw. In this case 75kw

going off these figues they are both around 25%

Where do people keep getting these ideas about drive train losses being a percent?

Example:

my GTT is making 1000kw at the fly wheel and you say i'm losing 30%. That gives me 700kw at the wheels.

300kw loss through the drive train. That would mean your 335kw GTT motor wouldn't be able to turn the back wheels on my GTT because all your power is being consumed by my drive train. But the drive train is identical.

Your GTT lost 85kw

My GTT lost 300kw

how do you explain that??

Drive train loses are NOT calculated by pertanges.

If the HSV lost 75kw and it's a manual and your GTT is a manual, same size wheels, blah blah blah, you will lose about 75kw. Or better still if someone is saying that a 206kw GTT mays 150kw at the wheels (56kw loss), guess what, your 335kw will lose about 56kw.

Edited by Public Enemy
that a 206kw GTT mays 150kw at the wheels (56kw loss), guess what, your 335kw will lose about 56kw.

Agree with Drivetrain loses are NOT calculated by percentages.

In this case probably a little more I would say 60-65kw loss, partly due to increased heat from the extra power.

The issue of drivetrain loss has been discussed thoroughly before in this thread:http://www.skylinesaustralia.com/forums/25...Kw-t169392.html

Agree with Drivetrain loses are NOT calculated by percentages.

In this case probably a little more I would say 60-65kw loss, partly due to increased heat from the extra power.

The issue of drivetrain loss has been discussed thoroughly before in this thread:http://www.skylinesaustralia.com/forums/25...Kw-t169392.html

yeap i wouldn't argue with that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...