Jump to content
SAU Community

Recommended Posts

Joe! you're back!!

where are you stationed now?

big farkin yes to what?

no I am not back I am still in Korea... damm winter!!!

I'll be off to Beiruit in Lebanon as United Nation Peace keeping force Korean contigent :D

will be back in Perth next year some time :D

BTW Yes to Extractors :) hahahah

hey eug, just had a look at the design of those headers, they look mad as nice flow and high quality but i had one issue with them. The O2 sensor looks to me like it only reads from 2 of the outlets which would give it false readings and be a killer on your fuel and mabye rob some power off, it would be best for the sensor to mount in the collector just before the cat or to run muitiple sensors to get a correct reading, im not sure how much this affects the skylines, i just did a mates WRX turbo back exhaust and the O2 sensor mounted in a really crummy spot and his fuel consumption went down to like 280 kms so we had to move it and extend a few wires.

I know skylines arnt this tempremental with the O2 sensors but it might be something to look into if there is a big reported loss in fuel consumption, also in a high preformance application with tunning an after market ecu you wideband sensor probably wouldnt be as affective either

i had a look at that as well. you are correct, that is the best 'bolt out - bolt in' compromise method that they can fabricate.

ideally the gases in each pipe should be equal, it is on my to do list to suss that out. i run an SAFC2 with no dramas in fuel consumption.

yeh, i didnt think that it would have to much of an affect cause my mate shuan got some for his 32 on your first group buy and didnt mention an issue to me, just thought i'd mention it, wouldnt be to hard to re-fabricate a new mounting position, if anyone thinkin of doing it would be nice to see some before and after see if it makes any difference anywhere

  • 2 weeks later...

please check the group buy thread guys.

i've spoken to one of the guys at partsco and the order has been given a priority.

fabrication begins monday! hopefully they'll be on their way prior to xmas, no promises.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...