Jump to content
SAU Community

Recommended Posts

where did u get the clear lens?

they are 94-97 honda accord headlights.

they have 3 styles. stock chrome look, R33 style black housing, and these halo angel eye with projector style.

suites the r32 pretty well:)

i'm sorry... that looks ghetto. it doesn't even fill the hole properly. you should get an eyelid and cover that nasty gap... then it'll OK i guess. still doesn't curve the same as the indicator etc.

we don't have to worry bout DOT approvals on headlights here so we don't have to do ridiculous headlight swaps for compliance... thank god.

would be alright if you did a retrofit of the honda rear section and grafted into the front half of the standard r32 headlight.

well if it was a true projector setup, which i doubt at that year model - but it would fill that gap :(

i'm sorry... that looks ghetto. it doesn't even fill the hole properly. you should get an eyelid and cover that nasty gap... then it'll OK i guess. still doesn't curve the same as the indicator etc.

Stole the words from out of my mouth!..

i dont like it when people dont pay attention to detail..

Just dosnt look right..

looks like when they put the Jap Spec lights on the civics and integras.. theres something just not right with it.. I cant put my finger on it

Edited by GTS4WD

the problem that the R32 owners in canada face is that their headlights need to be DOT approved to register the car (sorta like our ADR's that our cars are complied to meet)... its an american standard, and as the R32 was never sold in the US it doesn't have that marking on the headlight.

Also the angle of the light is slanted so that it doesn't glare onto oncoming drivers on the right... but in canada the oncoming drivers are on the left... again... sucks to be attached to the US.

so unfortunately you HAVE to change your headlights to something DOT approved like ghey honda lights, or S14 240SX headlights or something like that if you wanna keep your car legal. There's a company now that makes Garage Infini style lights over there, which kinda solves the problem.

At least the R33's ahve plastic headlights, so changing em to comply with DOT regs will be easy as.

  • 3 weeks later...
i'm sorry... that looks ghetto. it doesn't even fill the hole properly. you should get an eyelid and cover that nasty gap... then it'll OK i guess. still doesn't curve the same as the indicator etc.

we don't have to worry bout DOT approvals on headlights here so we don't have to do ridiculous headlight swaps for compliance... thank god.

you be my guest and tell me which headlight to replace it with that was ment for North American Cars... tried and true this was the best fitting amongst GTRCANADA.COM and we should know what we are doing.. we need this to pass our inspection legally.

lol sorry martin, i didn't mean that to come across the way it did. I know you guys have little to no alternative, so I can empathise... but if you're gonna rock that on the street every day I'd get some eyelids made up to blend it better.

I'd say those ones that the company made up using a cover and two round lights to replace the headlight looks better.

I'm sure if you were given the option to run standard lights you wouldn't even think of using accodrd headlights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...