Jump to content
SAU Community

Recommended Posts

Hey guys...

Hoping u can shead some light on this for me..

While getting up to speed to get on the freeway this morning, was in 2nd or 3rd gear , on boost and sitting at 5,000rpm.. the car all of a sudden starts spluttering and felt like a miss fire like a limiter had kicked in...

Havent changed anything anything on the car yet and is completly stock..

Im guessing its going to be spark plugs but i thought id post it up anyway!!

thanks in advance for ya help

mick

Link to comment
https://www.sau.com.au/forums/topic/194902-r34-gtt-with-a-problem/
Share on other sites

Hey guys...

Hoping u can shead some light on this for me..

While getting up to speed to get on the freeway this morning, was in 2nd or 3rd gear , on boost and sitting at 5,000rpm.. the car all of a sudden starts spluttering and felt like a miss fire like a limiter had kicked in...

Havent changed anything anything on the car yet and is completly stock..

Im guessing its going to be spark plugs but i thought id post it up anyway!!

thanks in advance for ya help

mick

Just a thought, wasn't the TCS control kicking in when u put ur foot down was it?

not that i remember...have had cases when i have come through corners and the skid light has come on...

going to jack the car up this weekend and spin one wheel and see if i have a LSD or mechanical LSD in it... still know f**k all bout the car atm!

not that i remember...have had cases when i have come through corners and the skid light has come on...

going to jack the car up this weekend and spin one wheel and see if i have a LSD or mechanical LSD in it... still know f**k all bout the car atm!

When that skid light comes on, the TCS has kicked in. Just in case u didnt know there is a TCS button on the left of steering just above ur knee. Hit that button, a light on the dash will pop up saying TCS OFF. Then put ur foot down n have fun, Oh be careful in the wet, boost on = sideways...

haha... found that button the first day i had the car... thought it would be a flick switch...didnt notice till a few minutes later that there was a light on the dash for it.. haha

so if i turn the tcs button off and try it agian it shouldnt hesertate at 5,000rpm??

haha... found that button the first day i had the car... thought it would be a flick switch...didnt notice till a few minutes later that there was a light on the dash for it.. haha

so if i turn the tcs button off and try it agian it shouldnt hesertate at 5,000rpm??

Try it, put ur foot down n find out, then hit the button again to turn it off(TCS ON) n try again. If thats not the issue, refer to all other threads.

If it hesitates its not tcs because tcs engages when you lose traction, I dont know many people pulling 5g around a corner tight enough to turn it on. unless its raining. i.e 5g is a lil high for rounding a corner.

I think your sparks are on the way out mate, get someone to look at them.. skylines have a problem at 5g with flatspots so could be that..

Do you have a front mount? pull out ur plugs and see if they are fouled..

If you cant be bother get on the highway and launch it to try burn off anything on the plugs.. you will prob have to change them soon. when you do regap them to 0.8 - 1.0 somewhere about there.. unless you up the boost then keep it at 0.8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...