Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: Skyline

Milage: 125000

Transmission: Tiptronic Auto

Colour: BP9 (dark blue pearl)

Location: Mount Gambier south australia

Complied? Yes

RWC supplied? n/a

Currently registered? XPD 469 untill mid jan 08

Price: 15000 ono

Contact: 0447004910 or pm me

Comments / Modifications: bog stock car, has apexi pod filter thats about it, has factory sat nav/tv, 12disk stacker in boot, vipper remote start/turbo timer alarm, 17in alloys(std) needs new rear tyre fronts just replaced. , can also meet half way for some one that is interested

Images:

lastof43002.jpg

lastof43001.jpg

lastof43013.jpg

lastof43009.jpg

lastof43008.jpg

lastof43007.jpg

Edited by soslo_31
Link to comment
https://www.sau.com.au/forums/topic/196274-r34-sedan-gtt-sa/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...