Jump to content
SAU Community

Group Buy - Aluminium Flywheels - Expression of Interest

Guest s13

By Guest s13,
in For Sale (Private Car Parts and Accessories)

 Share

Recommended Posts

Guest s13

Guest s13

Posted
Posted

Mr Fanny,

No probs. Just to clear things up a little:

Locally made super light aluminium 3.5-4.0kg (inc ring gear), $900 inc gst (ring gear fitted + balanced with your pressure plate.) plus frieght say $20 = $920

Locally made light aluminium 4.5kg (inc ring gear), $750 inc gst (ring gear fitted + balanced with your pressure plate). PLus frieght say $20 = $770

Inasnt's Taki Flywheel 4.5kg (inc ring gear), $680 + ring gear fitting and balancing with your pressure plate, say $100 = approx $780

Brodys Ogura Flywheel 4.8kg (including ring gear), $490 plus freight (from Japan maybe $50?), plus ring gear fitting and balancing ($100)= $640

So Inasn't and the local light one are very close, with the super light one being a fair bit lighter and more expensive and the Ogura one being good value but heavier. Are there any other options out there or maybe we can go for a group buy on the Taki one and try to get it cheaper?

rev210 Grand Master

rev210

Posted
Posted

the ogura is 'chrome molly' and at 4.8kgs (less than 1/2 stock weight) is light enough for a streeter. It's also 100% stronger than the original and if you like can be machined down further to reduce the weight.

The ogura has a ring gear on it. I fitted my own BTW. It weighs approx 4.8kgs as I weighed it myself AND on the Ogura website it rates it at 4.8kgs

These aluminium units will offer a good 'circuit race' alternative to the ogura if you don't want to further machine the flywheel (most places will charge about $100 to do this including a balance).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Murray_Calavera
      S1 rb25/s14 starting problem

      By Murray_Calavera · Posted

      Are you 100% sure this isn't tune related?
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • Nightmare_mistress_R33
      No Voltage At Fuel Pump

      By Nightmare_mistress_R33 · Posted

      I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...