Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: Skyline GTS-X (late 87 Model, ECCS)

Milage: 159XXX

Transmission: Manual

Colour: White

Location: Melbourne

Complied? Yes

RWC supplied? Yes

Currently registered? Yes

Price: $9,000

Contact:

Blair

0411 289 930

[email protected]

Comments / Modifications: It is a beautiful car, very rare! I bought the car off it's first Australian owner in 2004, I have only done 30,000 KM in the 4 years I have owned the car. It is very clean bar a few minor pin dents and one scuff, pictured, on the right hand side of the front bumper. The Car has a sunroof and a very clean InteriorCar has traveled 159XXX KM but engine has done under 80,000]

Car has been Garaged every single day and night I have owned it, explaining the great condition of the paint!

Car was standard except for a 3" exhaust when I bought it.

Modifications are as follows:

Engine Modifications:

- Silver Rocker Cover RB20 DET Engine 80,000km

- 3" exhaust, all the way through from turbo

- Custom stainless Intake pipe, sounds really nice :)

- Custom made front mount Intercooler good size (450x300x70 I think)

- VG30 Steel Wheel Turbo

- 444cc Injectors

- Bosch 040 fuel pump

- Oil Catch Can

- Jim Berry race clutch, custom made Carbonic button clutch, built to 3000 pounds clamping force, will never die and nice to use!

- R200 LSD still very tight

- Twin Stage Boost Controller, .7 bar - 1.15 Bar (11-16 pound)

- Dr Drift Re-Mapped Computer, this is the car that made him famous, first one he chipped and will happily re-tune for next to nothing, just Dyno Time. :D

On last Dyno tune, car made 198 Rear Wheel KW's, pulls Hard all the way to Red Line!

-All Oils change at regular intervals, diff, gearbox and engine every 4000-5000km with only premium oils

Suspension Components and Interior

- Cusco (Blue) Strut Brace

- Lowered Springs

- Electronically Adjustable Suspension, soft, Medium and Hard

- Lenso Concept 5, 17" Wheels, look really nice with the bolt on spacers!

- EBC Green Stuff Brake Pads

- Autometer 30psi Boost Gauge

- R32 GTR front Seats

- Viper 791 XV alarm With remote Start, cost $1000 installed

- 6" Speakers in the rear and splits in the front

For those of you with a keen eye for detail, the courier sticker on the car is solely for parking purposes in the city :)

Images:

post-9426-1197009311_thumb.jpg

post-9426-1197009335_thumb.jpg

post-9426-1197009363_thumb.jpg

post-9426-1197009386_thumb.jpg

post-9426-1197009409_thumb.jpg

post-9426-1197009439_thumb.jpg

post-9426-1197009461_thumb.jpg

post-9426-1197009486_thumb.jpg

post-9426-1197009512_thumb.jpg

post-9426-1197009538_thumb.jpg

post-9426-1197009565_thumb.jpg

post-9426-1197009591_thumb.jpg

Edited by r31 Koop
Link to comment
https://www.sau.com.au/forums/topic/196671-hr31-gts-x-sold/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...