Jump to content
SAU Community

Recommended Posts

Hey,

Trying to find a R33 GTR to buy but cant find one in sa that apeals to me... but in queensland there is one that looks like what im after, even down to the colour and price (shit body kit on it tho!! lol)... Its just what has to be done to get rego on it here in SA? does it have to go through a full regency inspection?

The mods are

Garrett 400HP Turbo GT2860R x 2.

Sard 650CC injectors,

high volume Nismo Fuel Pump,

CES Ceramic coated dump pipes and secondary exhaust

80mm system with high flow CAT

Apexi Power FC with Hand Controller,

NI Water Pump.

Tomei Poncams Type "B" and Tomei adjustable timing gears

clear timing gear cover,

GFB Bleed Valve,

Tein Super Street fully adjustable suspension with EDC controller for on the move electronic adjustment.

So the defectable things would be the turbos, Apexi power fc, tein suspension... that all?

Id have top change that to get redgo?

Link to comment
https://www.sau.com.au/forums/topic/197949-buying-interstate/
Share on other sites

Have bought a few cars including my GTR interstate.... you must take it for an identity check only. (check vin/engine no to see if stolen)

Go to sturt inspection depot... will be easier than regency.

However if they see any obvious major defect they will send you to regency for full inspection.

Have bought a few cars including my GTR interstate.... you must take it for an identity check only. (check vin/engine no to see if stolen)

Go to sturt inspection depot... will be easier than regency.

However if they see any obvious major defect they will send you to regency for full inspection.

so i dont even need to take it to regency?

when you say major defects, on that list is that just suspension and if i disconnect the power fc handcontrol that would be ok?

apart from that?

Going to the sturt shop is the same as going through the engine check section at regency. All the do is check the vehicle complies with the import thingo (plate) and the engine numbers match etc.

If u do get defected (when i should say) u will need to take off the AM parts anyway-

Garrett 400HP Turbo GT2860R x 2. - come off

Sard 650CC injectors, - come off

high volume Nismo Fuel Pump, -ok (IF its internally mounted)

CES Ceramic coated dump pipes and secondary exhaust - ok

80mm system with high flow CAT - ok (providing its less than the required Db)

Apexi Power FC with Hand Controller, - out (der)

NI Water Pump.- ok

Tomei Poncams Type "B" and Tomei adjustable timing gears - ok (as long as the cam gears are covered)

clear timing gear cover, -covers the last point ie get rid of it if u dont want an instant defect regardless...

GFB Bleed Valve, - off (its altering boost)

Tein Super Street fully adjustable suspension with EDC controller for on the move electronic adjustment. - off

Basically they frown on anything that isnt std. So if yer buying the car fer all the bits, and end up taking them off later, is it worth the extra?

They can be engineered, but it will cost, and once again regency can say no they dont like it anyway (law unto themselves) and dont have to comply with any engineers report.

Edited by Bl4cK32
Going to the sturt shop is the same as going through the engine check section at regency. All the do is check the vehicle complies with the import thingo (plate) and the engine numbers match etc.

If u do get defected (when i should say) u will need to take off the AM parts anyway-

Garrett 400HP Turbo GT2860R x 2. - come off

Sard 650CC injectors, - come off

high volume Nismo Fuel Pump, -ok (IF its internally mounted)

CES Ceramic coated dump pipes and secondary exhaust - ok

80mm system with high flow CAT - ok (providing its less than the required Db)

Apexi Power FC with Hand Controller, - out (der)

NI Water Pump.- ok

Tomei Poncams Type "B" and Tomei adjustable timing gears - ok (as long as the cam gears are covered)

clear timing gear cover, -covers the last point ie get rid of it if u dont want an instant defect regardless...

GFB Bleed Valve, - off (its altering boost)

Tein Super Street fully adjustable suspension with EDC controller for on the move electronic adjustment. - off

Basically they frown on anything that isnt std. So if yer buying the car fer all the bits, and end up taking them off later, is it worth the extra?

They can be engineered, but it will cost, and once again regency can say no they dont like it anyway (law unto themselves) and dont have to comply with any engineers report.

OK thanks for that.....

But what would be needed to be removed for the very first check to get redgo here?

anything that is an obvious defect...Nothing that would make them considering calling u back >_<

Probably just keep the sus jacked up, swap the clear cover, and try hide the turbos under some heat shield and u should be in and out.

cheers for the advice!

wish it wasnt in Queensland!!! id be driving if it was in melb!

Have bought a few cars including my GTR interstate.... you must take it for an identity check only. (check vin/engine no to see if stolen)

Go to sturt inspection depot... will be easier than regency.

However if they see any obvious major defect they will send you to regency for full inspection.

CORRECT..........and the things that stand out the most are black windows, too loud and too low.....other than that make sure your pods are secured because they sometimes shake them.

my dear Adam

why dont u try to get a stock 33 GTR

at least u know it hasn't been thrashed

go through Regency, then mod what u want... the right way

IMO

honestly for 2 reasons.

1 stock can still be thrashed!

2 cheaper to buy one with things done to it already then out lay yourself and its easier to do it that way

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
×
×
  • Create New...