Jump to content
SAU Community

Recommended Posts

Why do you want so much power if all you wanna do is cruise? honestly, it seems like a waste. Aim for 250rwkw, it's a lot more fun and useable on the street... as someone said before.. with a big turbo, you'll spend more time getting it to make positive pressure than you will actually enjoying it... and when it comes on, hope u know what u're doing...

lag... lag.... lag..... boost/wheelspin/holy sheet/lolwall

seeing as the gt35 will see full bost at around 4000rpm. i dont really call that alot of lag. then include the fact that im gonna be running a 3.0L setup. so i expect lag to be close to not even worrying about

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

alot of cars up here i see everyday driving.. some of u may have seen them

TOPRPM-874awhp (33gtr)

ONBAIL-hp? but i know its alot (32gtr)

HITMUP- 600+rwhp (t51r, 2spd pwrglide 5800rpm stally)

also have a mates 33gtst with 22s, gauges on bonnet, lowered etc etc

I run a R33 GTR V-Spec that is reasonably stock apart from pods and a big exhaust and it attracts a degree of attention from the cops.

It is amusing the number of times that they do a U turn and then follow me for a while checking the car out. They then come up along side the car and see that an old fart with a grey beard is driving it and they then loose interest and just drive away.

It is important to not do anything to attract attention to yourself and to keep a low profile in the spots where the cops hang out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...