Jump to content
SAU Community

Recommended Posts

Same reason you see burnouts up hills.

Those with pissweak cars need a 'chock' or hill to do a skid otherwise they don't have the power.

1 strip usually ensues.

These are what we call "sikkunts", often found in low-economic areas such as kwinana/balga.

ROFL @ maccas trays!

When I used to live in scarborough years ago (before they closed off half of that street that goes up the hill at the end of the carparks), someone in a Swift dumped 20L of oil at the bottom of that hill and ALL night idiots were lighting it up up the hill, got to the point where the cops came out and sat on the median strip with the lights going all night.. highly annoying as it was RIGHT OUTSIDE OUR BLOODY APARTMENT!

ROFL @ maccas trays!

When I used to live in scarborough years ago (before they closed off half of that street that goes up the hill at the end of the carparks), someone in a Swift dumped 20L of oil at the bottom of that hill and ALL night idiots were lighting it up up the hill, got to the point where the cops came out and sat on the median strip with the lights going all night.. highly annoying as it was RIGHT OUTSIDE OUR BLOODY APARTMENT!

That was a ritual for decades before the appartments were built.

Scab's burnout night, every weekend. Features include:

* police riot vans

* A demonstration by the council sand dumping ute and it's dare devil team of on-call workers.

* both red and yellow stickers

* people showing their tits (including the rare female)

* People running around a car park with car jack

* slots of blown tyres that look like the ones you left at the tyre place the day before because they were bald.

* cars driven by drivers without a licence doing a burnout

* unlicenced cars doing a burnout with drivers who still have a licenece but, are about to lose it

* unlicenced cars driven by unlicenced drivers doing burnouts

* Unlicenced monkeys driving unlinced uni-cycles doing burnouts

* people giving the signal and saying things like 'arc it up mate'

And many more exciting events.

All sounds like a standard firday nite in Nowra, they have a chemical factory so there chosen traction suppressant was pink detergent.....

Clean your wheel archs at the same time...

Yepper

the local 1/4 mile was out the front of the RTA...

saw my first ever drag race there, guys with torchs at the finish and start on the flash of tits....

miss those days. maybe 1987 or 88

sounds like you've spent some time there as well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...