Jump to content
SAU Community

Recommended Posts

Same reason you see burnouts up hills.

Those with pissweak cars need a 'chock' or hill to do a skid otherwise they don't have the power.

1 strip usually ensues.

These are what we call "sikkunts", often found in low-economic areas such as kwinana/balga.

ROFL @ maccas trays!

When I used to live in scarborough years ago (before they closed off half of that street that goes up the hill at the end of the carparks), someone in a Swift dumped 20L of oil at the bottom of that hill and ALL night idiots were lighting it up up the hill, got to the point where the cops came out and sat on the median strip with the lights going all night.. highly annoying as it was RIGHT OUTSIDE OUR BLOODY APARTMENT!

ROFL @ maccas trays!

When I used to live in scarborough years ago (before they closed off half of that street that goes up the hill at the end of the carparks), someone in a Swift dumped 20L of oil at the bottom of that hill and ALL night idiots were lighting it up up the hill, got to the point where the cops came out and sat on the median strip with the lights going all night.. highly annoying as it was RIGHT OUTSIDE OUR BLOODY APARTMENT!

That was a ritual for decades before the appartments were built.

Scab's burnout night, every weekend. Features include:

* police riot vans

* A demonstration by the council sand dumping ute and it's dare devil team of on-call workers.

* both red and yellow stickers

* people showing their tits (including the rare female)

* People running around a car park with car jack

* slots of blown tyres that look like the ones you left at the tyre place the day before because they were bald.

* cars driven by drivers without a licence doing a burnout

* unlicenced cars doing a burnout with drivers who still have a licenece but, are about to lose it

* unlicenced cars driven by unlicenced drivers doing burnouts

* Unlicenced monkeys driving unlinced uni-cycles doing burnouts

* people giving the signal and saying things like 'arc it up mate'

And many more exciting events.

All sounds like a standard firday nite in Nowra, they have a chemical factory so there chosen traction suppressant was pink detergent.....

Clean your wheel archs at the same time...

Yepper

the local 1/4 mile was out the front of the RTA...

saw my first ever drag race there, guys with torchs at the finish and start on the flash of tits....

miss those days. maybe 1987 or 88

sounds like you've spent some time there as well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...