Jump to content
SAU Community

Recommended Posts

IMG_0093.jpg

local pick up only.

Item: Blitz BOV on r33 hard pipe and blitz stainless mesh pod filter

Age: unknown

Condition: excellent

Price: 100 firm

To Fit: (What car) any

Location: smithfield nsw

Contact: 0401471604

Comments: This blitz bov is in excellent working condition. It comes with a air filtered vent. It sits on a r33 hard pipe which was cut to fit a fmic. Off cut bits are included with sale, all needs to be done is the offcuts welded back to the pipe and can fit any r33 with side mound intercoolers. Blitz pod filter includes adapter to fit r33 skyline airflow meter, pod in excellent condition.

Edited by rocketeer

what kind of noise does that BOV make like a whistle ??? and i could put in my 32 easy with out welding it cant i???

IMG_0093.jpg

IMG_0094.jpg

local pick up only.

Item: Blitz BOV on r33 hard pipe

Age: unknown

Condition: excellent

Price: 130ono

To Fit: (What car) any

Location: smithfield nsw

Contact: 0401471604

Comments: This blitz bov is in excellent working condition. It comes with a air filtered vent. It sits on a r33 hard pipe which was cut to fit a fmic. Off cut bits are included with sale, all needs to be done is the offcuts welded back to the pipe and can fit any r33 with side mound intercoolers.

Item: Hi octane pod filter cover in black plastic

Age: 5months old

Condition: good

Price: 50

To Fit: r33 skyline gtst

Location: smithfield nsw

Contact: 0401471604

Item: M's stainless steel mesh pod filter with adaptor plates and hose clamp

Age: unknown

Condition: excellent

Price: 40

To Fit: r33 skyline gtst

Location: smithfield nsw

Contact: 0401471604

Item: pivot air flow convertor

Age: unknown

Condition: good condition

Price: 30ono

To Fit: (What car) any but did come off a r33 skyline gtst

Location: smithfield nsw

Contact: 0401471604

hi there,

do you have a pic of how the pod filter cover looks like fitted on the car? is it fully enclosed?

what does the air flow converter do?

  • 4 weeks later...
Hey, do you have an adaptor to fix the BOV to other pipes. Im looking for a BOV but not for a r33. Need it to be able to adapt to a standard pipe.

Sorry mate but that is all i got. I guess you could always cut it off and reweld to a straight pipe to suit your need

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...