Jump to content
SAU Community

Recommended Posts

just an other update guys....

this gb is still going ahead so dw about it.

as far as people are concerned i have a few friends that will be joining very shortly.

ive also recieved a couple of pms so hopefully more ppl.

like i said if anyone is in a rush to get these let me know and ill close the GB and get the manifolds rdy to go.

but as far as i know no ones in a real rush yet so i wouldnt mind seeing if we really can hit 10 people.

more info soon

yep sounds good, no rush at all

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

hey ppl

i was just thinking

why nor make the exhaust manifolds flanges to suit rb26 and rb25/20

i seen a apexi cast iron one with both stud patterns

coz i have a 3 rb25's and only one rb26

would they do this?

hey guys i dont know if u all got my PM but it looks like im gonna have to stop the GB here......

if you all can who are interested please pm me your details in the following format

Full name

SAU ID

Car Make and Model

Turbo Application with Housing size

Extras Needed

Full address

in return you will get my bank details including my contact details. (use SAU ID as description)

thanks guys

another update guys, been trying to contact kyle his been busy.

will let u know wats going on when i speak to him

Edited by R34NRG

hows it going guys andru here again with another update.

kyles been having some issues with his current freight company so his been a bit slow to get back to me about the orders.

ive sent u all a PM confirming your oders and i will be sending out my bank accounts very shortly. keep the money rdy to go

another update guys.

still waiting on kyles reply on turn around times for the manifolds, shoudlnt be to much longer.

as u can see i update things as much as i can, so i hope u all know im trying my best to get this moving along.

okai guys kyle finally gotten back to me but it seems to be some semi bad news.

his been fully overloaded with orders so turn around times are about 2 weeks.

i will eb sending you guys each PMs to see how u wanna go about this.

thanks for all ur patience, hopefully this dosnt hinder us to much.

andru

  • 2 weeks later...

just another update again guys, everything seems to be going smoothly, ive sent kyle a msg asking how everythings going and if we are still expecting the manifolds in the near week.

will keep everyone posted so check back regularly.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...