Jump to content
SAU Community

Recommended Posts

Ok guys its a pretty simple question but after searching couldnt really get an answer.

All i want to know is will the AFC neo support 250rwkw along with all the other necessary mods?

Or is it necessary to use an EMU or other....

250rwkw is my goal over the next few years so want something that will support it from the beginning.

Thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/201968-afc-neo/
Share on other sites

Ok guys its a pretty simple question but after searching couldnt really get an answer.

All i want to know is will the AFC neo support 250rwkw along with all the other necessary mods?

Or is it necessary to use an EMU or other....

250rwkw is my goal over the next few years so want something that will support it from the beginning.

Thanks guys!

Won't 'support' very well at all.

Power FC is your answer in the Apexi range of products.

End of story. :P

Link to comment
https://www.sau.com.au/forums/topic/201968-afc-neo/#findComment-3588353
Share on other sites

The engine management system is what controls how much fuel and air goes into the engine. Get it wrong, and stuff breaks. Expensive stuff. $1500 is a relatively small price to pay for good economy, emissions, power and reliability.

What other systems would you consider aside from a PowerFC?

Don't forget to factor in the cost of tuning. The PowerFC is a very well known computer, so programming it won't cost as much as more esoteric hardware. If you retune after every powertrain mod (which you should technically do) then the lower cost of tuning will put the PFC cheaper when you're talking Total Cost of Ownership.

Link to comment
https://www.sau.com.au/forums/topic/201968-afc-neo/#findComment-3589929
Share on other sites

Unless someone has a reason why the pfc is $700 better than the EMU?

It has a funky looking hand controller? :(

Power FC questions and answers that way ------------------------> http://www.skylinesaustralia.com/forums/Fa...req-t64201.html

Link to comment
https://www.sau.com.au/forums/topic/201968-afc-neo/#findComment-3590613
Share on other sites

i had in my 33 a safc2 and emanage (not at the same time), and before i got rid of it i tested a power fc out in my car for a mate who bought 1 for his build, was already tuned for similar mods to my car, and it shat all over both the previous systems i had.

i got a 34 now and i wont be getting anything other than a pfc.

also 1500 is if u want a new 1, u can get 1 for a rb25det for about 900-1000 second hand no hand controller. u dont need the controller to tune as tuners just plug in a lap top or if u do it.

my 2 cents

Link to comment
https://www.sau.com.au/forums/topic/201968-afc-neo/#findComment-3590640
Share on other sites

Thanks for that daniel, thats the kind of advise i like....personal experience. Especially when you have used all three of the ecu's i have been contemplating! I think its time i start searching for a 2nd hand pfc!

Thanks for all your help guys! :D

Link to comment
https://www.sau.com.au/forums/topic/201968-afc-neo/#findComment-3591379
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
    • lights are on just the one click.  
    • Absolutely matters because, while a temperature change will eventually reach a sensor at the end of a static line, the response time is far far far too slow to be useful. Might as well not have a temp gauge at all.
    • When I was eyeing off the 370GT (after deciding I didn't want to spend 30-40k+ to relive my early 20s in an R33) I thought it'd be a good project to add a turbo to it. Now that I have a 370GT, and I've had a couple of chances to open it up, I'm pretty stunned by how much power it makes 🫠 Honestly, the way the VVEL opens it up, it almost feels like there's a little turbo tucked away in there somewhere. It's like Nissan looked at VTEC and said "hold my beer" 😁 Has anyone thrown a turbo into their 370Z or 370GT? Is there a conservative boost level you can run without having to upgrade the fuel system, or are bigger injectors and a bigger pump a given?
×
×
  • Create New...