Jump to content
SAU Community

Recommended Posts

Vehicle 1978 LEYLAND MINI LS

Price $1600

Kilometres 85,000

Body Sedan

Colour Green w/ White roof

Interior Colour Beige

Transmission 4 speed Manual

Engine 4 cylinder Petrol Carburettor 1000L ( 998cc)

Reg Plate UYM717

Reg Expire MAR-2008

Engine No

RWC N/A

Brief Comments great first car, very good condition, extremely reliable

Long Comments This is a classic Leyland Mini which is in original condition. Nothing has been altered except for the addition of a CD player and decent speakers (nothing flash). It is in good all round condition and would make a wonderful first car to learn how to drive in. There are no mechanical problems with the car. The paint has been redone in British racing green with a white roof. The passenger side door does not open from inside. Come and have a look at the car. I'm selling since I am going overseas in the next few months. I really do love this car you get a lot of nice attention and remarks when on the road.

Call me on 0414 580 898 to discuss or inspect. I do not check this forum much anymore coz I sold my skyline.

This car needs to be sold tonight or tomorrow morning!

http://www.carsales.com.au/used-cars/priva...x=mode+matchany

Great daily car!

post-32189-1201666814_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/203748-1978-leyland-mini/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...